Port-A-Cool(r) Introduces New 16-INCH VARIABLE SPEED MODELS

The new Port-A-Cool® 16-inch variable speed portable evaporative cooling units produce more air than any previous 16-inch model. The variable speed units crank out 4,000 CFM of delivered air. Plus, the new units accomplish the higher airflow rating by utilizing a 1/3 hp fan motor that draws only 2.9 amps of power.

CENTER, TX (PRWEB) October 19, 2006 -- The new Port-A-Cool® 16-inch variable speed models are here joining the top selling variable speed 24 and 36-inch fan blade sizes already a staple in the Port-A-Cool® lineup.

Producing more air than any previous 16-inch model, the variable speed units crank out 4,000 CFM of delivered air. Plus, the new units accomplish the higher airflow rating by utilizing a 1/3 hp fan motor that draws only 2.9 amps of power.

These new units from Port-A-Cool® are available in two models. The new 16” variable speed model has a three-gallon built-in reservoir and it can be attached to a 3/4-inch garden hose for a continuous water supply. Like the other 16-inch Port-A-Cool® units, it is available with an optional accessory cart with casters or can be used on a tabletop or workbench. The 16” variable speed model with filler cart comes mounted on a roll around cart with casters and a 22-gallon water reservoir that eliminates the need for a garden hose or other outside water source.

In addition to being manufactured of durable, rust and leak-proof polyethylene plastic, all Port-A-Cool® portable evaporative cooling units are still the only units that are UL listed – not just the motor or the pump, but the entire unit.

For more information on either of the new 16-inch variable speed units, or to locate a distributor near you, call 1-800-695-2942 or 936-598-5651. Or, you can visit us online at www.port-a-cool.com.

###