Drop into RF Communications with XEMICS

XEMICS Drop-In RF module has been designed to facilitate the development of wireless communication applications and to reduce the time to market as it can be soldered directly onto a PCB.

(PRWEB) August 13, 2003 -- XEMICS Drop-In RF module has been designed to facilitate the development of wireless communication applications and to reduce the time to market as it can be soldered directly onto a PCB. With a small form factor and very low cost, this first complete drop-in module is designed for medium and high volume production. This has been achieved by the combination of the XEMICS RF expertise and quality production facilities in China.

No external components (excluding an antenna) are required. The module incorporates an on-board antenna matching, making integration straightforward even for engineers lacking previous RF experience.

With a 20mm x 20mm footprint, the DP1201A 433MHz module fits perfectly into most customers applications. Based on Surface Mount Technology (SMT) with components mounted only in one side, this module offers the advantage of being both very small and inexpensive. The interface based on half-pads (SMT) is purely digital and so no glue is required between the drop-in module and the microcontroller. For a higher flexibility, depending on the application, one or two antennas can be connected to the drop-in module.

The DP1201A 433MHz module can be soldered directly to the main system board like other components. Delivered in blister trays; the module can be assembled with an automatic system for high volume production, which significantly reduces the production cost.

The DP1201A 433MHz module includes all the technical benefits of the XE1201A, such as a glitch-free data bit synchronizer with a synchronized clock. The transmitted output power level, data rate up to 64kbps and frequency deviation are controlled via a 3-wire bus. Based on SAW resonator, the wake-up time of the drop-in module is similar to the transceiver and depends on the clock state (set via an internal register). If the clock is kept running, the wake-up time is 75µs max. With 13mA in transmission mode for an output power at +2.5dBm and 6mA in reception for a sensitivity at -107dBm@4.8kbps, the DP1201A 433MHz module represents an ideal balance between performance and price in countries where ETSI regulations do not apply. This module is available for less than $5.50 at quantities of 1000 pieces.

ABOUT XEMICS

XEMICS is a privately owned fabless semiconductor company with headquarters in Switzerland and a worldwide sales and customer support network. XEMICS delivers a range of advanced short-range wireless connectivity solutions to a global customer base. XEMICS is a leading designer and provider of Wireless RF transceivers and Bluetooth applications, data acquisition, communication products, CODEC's and GPS receivers. With a focus on high-quality low cost solutions XEMICS provides a combination of ultra-low power technology and innovative IC design.

For further information, please contact:

Isabelle Bellaton
Marketing Communications Manager
XEMICS Switzerland
Phone: +41 32 720 5562
Fax: +41 32 720 5770
E-Mail: pr@xemics.com
Website: www.xemics.com