Research And Markets - Investigate In Detail The Short And Long Term Benefits Of Each Of The 100 Mbit/S And Greater Standards (ATM, FDDI, And Fast Ethernet) Now

Research and Markets (researchandmarkets.com/reports/c10748) has announced the addition of High-Speed Datacom Chipsets: Products, Applications, Markets to their offering.

(PRWEB) December 15, 2004 -- A typical twisted nematic (TN) liquid crystal display consists of two polarizing filters with their lines arranged perpendicular (at 90 degrees) to each other, which, as described above, would block all light trying to pass through. But in-between these polarizers are the twisted liquid crystals. Therefore light is polarized by the first filter, twisted through 90 degrees by the liquid crystals, finally allowing it to completely pass through the second polarizing filter. However, when an electrical voltage is applied across the liquid crystal, the molecules realign vertically, allowing the light to pass through untwisted but to be blocked by the second polarizer. Consequently, no voltage equals light passing through, while applied voltage equals no light emerging at the other end.

Research and Markets (http://www.researchandmarkets.com/reports/c10748) has announced the addition of High-Speed Datacom Chipsets: Products, Applications, Markets to their offering.

This report examines in detail the short and long term benefits of each of the 100 Mbit/s and greater standards (ATM, FDDI, and Fast Ethernet), and how each will move toward dominance on the desktop in terms of: availability of integrated chip solutions; progress of standards groups; cost; developments; and the opportunities and pitfalls. It also presents a forecast of the growth of each of these markets.

The crystals in an LCD could be alternatively arranged so that light passed when there was a voltage, and not passed when there was no voltage. However, since computer screens with graphical interfaces are almost always lit up, power is saved by arranging the crystals in the no-voltage-equals-light-passing configuration.

This report is updated daily

The contents of this report are as follows:
Chapter 1 Introduction 1-1
Chapter 2 Executive Summary 2-1
Chapter 3 Profiles of Japanese Companies 3-1
Chapter 4 Profiles of US Companies 4-1
Chapter 5 Profiles of ROW Companies 5-1
Chapter 6 The AMLCD Factory 6-1
Chapter 7 Equipment Requirements and Trends 7-1
Chapter 8 Material Requirements and Trends 8-1
Chapter 9 Market Forecast 9-1
List of Figures
List of Tables

For more information visit http://www.researchandmarkets.com/reports/c10748

Laura Wood
Senior Manager
Research and Markets
press@researchandmarkets.com
Fax: +353 1 4100 980

###