MultiTherm has brought on a Myriad of new Heat Transfer Fluid Products

The leader in heat transfer fluids has brought on 8 new products that will fit your needs and process no matter what industry you are in.

(PRWEB) June 19, 2005 -- MultiTherm has the right fluid for your high temperature process application and every fluid provides energy efficient, non-hazardous, low viscosity applications that are recognized by USDA and FDA. Temperatures range from 0F (-12C) to 600F (315C) and are offered as follows:

- MultiTherms PG-1 is a high quality food grade heat transfer fluid for use in closed loop, liquid phase heating and cooling systems and is applicable to the Chemical, Food Process, Plastic, and Die Casting industries. The unique formula of MultiTherm PG-1 assures performance without the potential problems of many conventional fluids.
- MultiTherms IG-4 is a non-toxic durable heat transfer fluid for closed loop systems. Some of the benefits include a very low pressure system, excellent oxidation resistance, and a very high flash point (440 F). Chemical, Commercial Laundries, Die Temperatures, and Asphalt Storage are just a few of the applications
- MultiTherms 503 provides users with a non-toxic, low pressure alternative to chemical based heating and cooling fluids. Its main application is where low pressure and high efficiency is required. Heat loads can be achieved with lower flow rates, smaller heat exchangers or lower approach temperatures. Applications include Plastics Industry and Chemical Process industry.
- MultiTherms FF-1 is an economical way to remove loose material such as weld splatter, fines, and particulate matter, etc. left in lines and equipment, along with oil and some preservative coatings. This fluid is used in start-up and maintenance applications and when changing over to a new fluid.
- MultiTherms IG-1 has been designed to offer an economical alternative and highly refined thermal fluid for temperature ranging from 10F (-12C) to 550F (288C). Applications include Asphalt, Paper and Particle Board, Die-Casting, and Roofing Compounds.
- MultiTherms OG-1 has been designed to prevent oxidative degradation and deposits in open and closed loop systems. MultiTherm OG-1 heat transfer fluid is designed for a maximum film temperature of 600F and a maximum system bulk temperature of 550F. MultiTherm OG-1 offers the benefit of having a high flash point of 455F / 235C and a very low vapor pressure.

# # #