Ultrasonic Flow Meter for All Applications

Share Article

RS Hydro supply and install ultrasonic flow meters for all applications. From the latest Clamp On Tag Flow Meter from Panametrics to standard liquid ultrasonic flow meters.

RS Hydro supply the latest clamp on flow meter for low pressure mass flow measurement to middle east. Using correlation tag technology it is able to measure flows at lower pressures than other transit-time clamp on flow meters. Being a clamp-on device, it is not restricted by pipe size or composition.

The CTF878 measures gas flow non-invasively in pipes from six to 30 inches in diameter, over the range of 3.5 to 150 feet per second (1.1 to 46 meters per second). The flow meter is designed for applications such as natural gas transmission and distribution, compressed air, fuel gases, corrosive or toxic gases, high-purity gases, and air separation gases.

Correlation tag technology is effective in gas applications because of the compressibility of gases, which helps create the distortion of the ultrasonic signal needed for the flow measurement technique. The CTF878 gives customers the ability to handle a significantly wider range of clamp-on gas flow applications than was possible before. The main advantage of the CTF878 over transit time flow meters is its ability to measure flows at ambient or low pressures.

The CTF878 gives customers the ability to handle a significantly wider range of clamp-on gas flow applications than was possible before. The main advantage of the CTF878 over transit time flow meters is its ability to measure flows at ambient or low pressures.

RS Hydro specialises in portable and fixed installation non contact ultrasonic flow measurement for all liquids and gases.

Our portable gas ultrasonic flow meter is suitable for most gases including natural gas, nitrogen, oxygen and steam.

# 3# #

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Robert Stevens
RS HYDRO LTD
+44 0 1905 774002
Email >
Visit website