Eagle Thread Verifier, LLC Announces Next Generation of High Torque Thread Gauge System for Manufacturers

Share Article

Sterling Heights, Mich.-based Eagle Thread Verifier, LLC, makers of an automated thread gauge system, announced today the introduction of a new higher torque spindle (24 inch pounds, model HT-100), for use in automotive, aircraft, and appliance suppliers and various manufacturing facilities.

Sterling Heights, Mich.-based Eagle Thread Verifier, LLC, makers of an automated thread gauge system, announced today the introduction of a new higher torque spindle (24 inch pounds, model HT-100), for use in automotive, aircraft, and appliance suppliers and various manufacturing facilities. This next generation of the Eagle Thread Verifier (ETV) will enable the use of a flexible chuck, designed to check threaded holes not perpendicular to the surface such as the case with projection welded nuts and weld splatter which can occur in the threads.

With Eagle Thread Verifier’s expanded software within the controller, which operates the spindle, the system is able to precisely check the depth of a chamfer or a counterbore.

As with previous ETV models used for lower torque spindle work, the system checks the thread for pitch diameter (oversize / undersize), proper depth (minimum / maximum), missing holes, broken tap, proper depth of pipe tapped holes, and external threads. This gives ETV a larger range of information to stop production in seconds if a hole is not identified to the pre-established specification level. Checking for accurate threads saves countless man hours of sorting parts that are defective and repairing for final assembly.

“This new high torque ETV is going to give large-scale manufacturers the needed boost to improve the quality of their operations and eliminate missing holes or broken taps right there on the machine line,” stated Gordon Taylor, president of Eagle Thread Verifier. “Automotive suppliers in particular will quickly recoup their investment in Eagle Thread Verifier Systems.”

Even with the addition of the higher torque system to the line of thread verification systems, Eagle Thread Verifier still offers the flexibility to check the smaller threaded holes in delicate materials such as aluminum with the original lower torque spindle (9 inch pounds, model LT-50).

The ETV spindle can be added to an existing cell or Eagle Thread Verifier engineers will design and build a manual or automatic load “turnkey” system to fit the application. Manufacturers interested in receiving product specifications for the next generation of Eagle Thread Verifiers should contact ETV at (586) 764-8218.

About Eagle Thread Verifier, LLC

Eagle Thread Verifier is a patented automatic thread gauge that catches 99% of all thread problems in any manufacturing process. ETV is designed to operate in the rigorous production environment of coolant and chips, preventing improperly tapped parts from reaching final assembly. Over 50 million thread testing cycles have been conducted by the ETV system in manufacturing facilities throughout the U.S. The company’s headquarters are located in Sterling Heights, Michigan. For more information, visit http://www.eaglethreadverifier.com or call (586) 764-8218.

###

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Peggy Fenwick
Visit website