Simi Valley, CA (PRWEB) April 30, 2007
Turbonetics Torque-Master line of high performance diesel products now offers intercoolers for the '03-'07 Ford 6.0L Powerstroke diesels. Ford 6.0L Powerstroke owners can enjoy the benefits of increased and more efficient airflow to help dramatically lower intake air temperatures and thus keep exhaust gas temperatures (EGT's) low. Low exhaust gas temperatures are extremely important when towing for long periods and/or heavy loads. The Spearco Intercooler upgrade routinely drop intake temperatures by 150°F. That means an equal temperature drop in exhaust gas temps.
Once the initial investment is made, the result is a lifetime of free power and improved fuel economy. The intercooler reduces charge air temperature entering the engine, increasing the air density for increased power and torque, while reducing the overall thermal load on the engine and cooling system as exhaust temperature is reduced as much as 150°F. This results in less transfer of heat to the cooling system and assists in maintaining normal coolant temperature on long hard pulls towing high gross weight vehicles. Since the intercooler is mounted in the factory location there is no need to worry about making any modifications to the vehicle. In addition to power and performance, you can anticipate an increase in fuel economy as the cooler, denser air creates a leaner air-to-fuel ratio and in conjunction with less heat loss to the cooling system, fuel mileage can increase depending on driving conditions, weight towed, etc.
Spearco's drop-in replacement intercooler upgrade features W.A.V.E. Technology bar and plate cores for increased strength and efficiency by utilizing the maximum surface area of the cores available space and is pressure tested to over 200+ psi. The Spearco Intercooler upgrade drops in place very easily in 2-3 hours time. When the intercooler upgrade is combined with the Turbonetics Stage 1 Patented Ball Bearing Upgrade you have a win-win combination of more power and increased efficiency.
The Patented Ceramic Ball Bearing mentioned above has 50 times greater thrust capacity, spool up 500 rpm faster and are more resilient under high temperature shut-downs than conventional bronze thrust & journal bearing designs. Turbonetics is so confident in the design & construction quality that all of our products are backed with an unconditional one-year, No-Fault/No-Hassle Warranty on parts. Furthermore the Torque-Master line of diesel performance products look as good as they perform. Polished aluminum compressor housings, anodized aluminum back-plates, precision crafted intercooler end tanks, and meticulous weld beads are just a few of the cosmetic enhancements the Torque-Master line brings to the engine compartment.
Torque-Master Intercooler Features:
- Drop exhaust temps up to 400º F compared to stock.
- Bolt-on intercooler kit…no modifications required.
- Bar and plate core design - designed for rugged conditions and high boost levels.
- Computer modeled core design - high effectiveness and low pressure drop.
- Works with all ECU upgrade programs.
- Turbo and Intercooler can be used as a stand-alone upgrade kit or with any ECU upgrade or re-flash.
Ford 6.0L Intercooler Upgrade - P/N:11314