Overland Park, KS (PRWEB) August 15, 2008
Shipping Cases now carries SKB, which currently manufacture 55 Racks and 173 Cases in their industrial division.
New Roto Rolling Racks Improve on Roll-X Design:
Ideal for those looking to transport heavy rackmount gear, the Roto Rolling Rackmount Case series offers secure protection with the convenience of sturdy built-in wheels and a cushioned handle. Designed as a complete upgrade and stronger alternative. Ideal for those looking to transport heavy rackmount gear, the Roto Rolling Rackmount Cases offer secure protection with the convenience of sturdy built-in wheels and a cushioned handle. Designed as a complete upgrade and stronger alternative to our existing Roll-X Rack series, the new Roto Rolling Rackmount Cases feature industrial grade steel threaded rack rails (allowing non-destructive screw mount installation and removal) and full access rear lids. An optional rear-rack rail add-on (RRK4 or RRK6 kit) allows enhanced load capacity and stability, ideal for especially heavy weighted equipment.
The 1SKB-R4W (4U version) and 1SKB-R6W (6U version) Roto Rolling Racks models are rotational molded of high impact LLD Polyethylene with in-line wheels supporting heavy loads and a nearly indestructible, comfortable, low-profile pull handle for carrying comfort. The handle easily telescopes back into the case when not in use. Our proprietary trigger release latching system, with TSA recognized and accepted recessed locking latches, enables users to securely lock their cases and still have them inspected by airline security and safely checked as luggage. Both Roto Rolling Racks are designed to stack securely under the 1SKB19-RSF4U Studio Flyer.
Shock Rackmount Case Line Expands with Three New 4U Sizes:
Our Shockrack line of professional rackmount cases continues to grow with the introduction three new 4U shock rackmount case. The four unit 24" deep (3SKB-R904U24) Shockrack model expands the 24" deep series to seven different sizes. Our Shock rackmount case line of professional rackmount cases continues to grow with the introduction three new 4U shock rackmount cases. The four unit 24" deep (3SKB-R904U24) Shock rackmount case expands the 24" deep series to seven different sizes, while the four unit 30" deep (3SKB-R904U30) Shock rackmount case expands the 30" deep series to four different models. Each member of the 30" deep series is also available in a 28" deep version designed to accommodate proprietary Dell and Compaq rail systems. The 28" deep (3SKB-R904U28) Shock rackmount case is currently available.
As with all SKB 24" deep shock rackmount case, the 4U Roto Shock racks provide a rotationally molded tough shell with integrally molded valance, and they each come standard with eight elastomeric shocks (load up to 150 lbs). The load range can be enhanced by adding an additional shock on each mounting point. The 4U Roto Shockracks feature field-replaceable, black powder coated stainless steel latches, as well as a patent pending compound hinge door system that allows the lid to swing out and completely around and lie flat against the main body of the case (or alternately go lid-less with an effortless lift motion) and then be reinstalled with the same ease in seconds.
New SKB Rack Mount Server Cabinet:
SKB's new design is an eight unit 30" deep rotomolded shock Rack mount server cabinet which should be an instant success with all companies utilizing the deeper servers such as the new Dell and Compaq. Nobody else manufactures a rotationally molded shock rack that is 30" deep and that fits inside the center portion of the case. This new case has all of the same great features as the 24" deep Roto Shock Rackmount Cases. Standard features include: (patent pending) compound hinged doors, black powder coated stainless steel latches, removable 4" casters, eight HM-245 elastomeric shock (load range of 40 to 150 lbs.) with provisions to add additional shocks for an extended payload range, gasketed doors and pressure relief valve. The front and rear lids are designed to protrude into the base of the rack mount server cabinet approximately 1 inch. Coupled with the unique double wall structure of these rack mount cases, this design makes them incredibly stiff where this intersection occurs. Each 4U Roto Shockrack is securely stackable with the wheels on or off. In addition, this revolutionary design is the only such product that will open front and back while stacked. Other features include removable 4" casters, gasketed doors and pressure relief valve.
Larger 4U Model Joins the Studio Flyer Line:
Ideal for those looking to safely transport laptop computers, disk drives, audio interfaces or other rack mount remote recording equipment, the 1SKB19-RSF4U is a larger version of the original 2U Studio Flyer, adding 2U of rack.
Upgrades to SKB Stand Cases:
SKB have updated our entire line of ATA stand/hardware cases. These "rail-packs" have been modified to include TSA locking trigger release latches. TSA locks enable users to lock their cases yet still allow them to. We have updated our entire line of ATA stand/hardware cases. These "rail-packs" have been modified to include TSA locking trigger release latches. TSA locks enable users to lock their cases yet still allow them to be inspected by airline security and safely relocked.
All rail-pack cases are certified ATA (Air Transport Association) rated Specification 300, Category 1, the highest standard for an airline transport container, assuring a minimum of 100 common carrier trips. These highly durable ATA stand/hardware cases have straps with spring loaded reverse-cinch buckles for holding equipment securely in place when transporting. All sizes feature built-in wheels and comfortable handles for easy maneuvering and, they are covered by the SKB Lifetime Guaranty.
Shipping Cases Now provides speedy turnaround on rack mount cases with most cases shipping the next day.