With the introduction of the new applications and enhancements, the T1 E1 Analyzer Product suite adds significant value to T1 E1 testing needs of customers
Gaithersburg, MD (Vocus) September 24, 2008
Gaithersburg, Maryland, USA – September 23, 2008 – GL Communications Inc. announced today the release of enhanced T1 E1 Analyzer Hardware and Software - Version 5.13. Addressing a press conference, Mr. Jagdish Vadalia, Senior Manager of Product Development, said, “The T1/E1 Analysis Suite of products provides comprehensive analysis and emulation capabilities for voiceband and signaling protocol emulation and analysis. The additions to the T1 E1 Analyzer product suite now include: New hardware called Universal T1 E1 Analyzer cards, software for WCS ISDN Emulation, and other enhancements to protocol emulators and analyzers”. He added, “The Universal T1 E1 Analyzer cards easily plug into PCI 2.1 Compliant slots of any PC. The advantage they offer over prior version of cards is integrated hardware support for both T1 as well as E1, thus allowing easy switching between T1 and E1 interface testing”.
Mr. Vadalia further added, “New software for ISDN Emulation in Client-Server mode allows easy automation and remoting for ISDN PRI applications. Another application is “Pulse Mask”, used for detection, monitoring, and plotting of received pulses. It includes Monitor Pulse Mask and Pulse Mask Display modules that can be remotely controlled using simple commands by client applications. Significant enhancements are also introduced to a range of protocol products that include: ATM, MC ML-PPP, and UMTS protocols.” He added, “With the introduction of the new applications and enhancements, the T1 E1 Analyzer Product suite adds significant value to T1 E1 testing needs of customers”.
A brief summary of the new features in the T1E1 Analyzer - 5.13 Release are provided below:
•Universal T1 E1 PCI Cards:
GL has added to its T1 E1 Analyzer hardware test suite new hardware called "Universal T1 E1 Cards". These cards easily plug into PCI 2.1 Compliant slots of any PC. The advantage it offers over the prior version of T1 E1 cards is that it includes integrated hardware support for both T1 as well as E1 lines, thus allowing easy switching between T1 and E1 interface testing.
For comprehensive information on the product, please refer to Universal T1 E1 cards website.
Incoming pulses are tested for compliance against T1 or E1 standard pulse mask specified by the ITU G.703 standard and ANSI T1.102-1993. This feature is also available with the Client Server software for automation and remoting applications. It includes Monitor Pulse Mask and Pulse Mask Display modules that can be remotely controlled using simple commands by client applications.
- WCS ISDN Emulator:
This Client-Server application is used for performing complete ISDN switch and subscriber emulation. The functions that can be performed using client-server are:
•Configuring the ISDN layer parameters, called/calling numbering plan/type, type of ISDN service
•Placing and accepting calls for each timeslot or for the whole trunk
•Loging call records for complete or incomplete calls
•Simple NFAS setup for T1
For comprehensive understanding of the enhancements introduced to the product, please visit the .ISDN Emulator webpage.
- Client Server Pulse Mask:
This Client-Server application in Universal boards is used for detection, monitoring, and plotting of transmitted pulses. It includes Monitor Pulse Mask and Pulse Mask Display modules that can be remotely controlled using simple commands by client applications. Some of the commands supported are CheckPulseMask, validate pulse, stop pulse mask validation, and others.
For comprehensive understanding of the product, please visit WCS Pulse Mask webpage.
- Protocol Analyzers:
•ATM Analyzer - Real-time Capture Filter in ATM Analyzer now supports filtering of Idle Cells along with the specified VPI, VCI, and PT values. Segmentation and Reassembly feature in ATM Analyzer now supports AAL - Layer 0
•MLPPP Analyzer is also enhanced to decode padded NCP messages
•UMTS Protocol Analyzer- The UMTS protocol analysis is now supported over IP as well as over T1 E1 and ATM. The supported standards include ATM, ATM AAL2 & AAL5, SSCOP, IP, UDP, SCTP, SSCF-UNI, SSCF-NNI, SAAL-NNI, NBAP, ALCAP, Iub-FP, Iu-UP, UMAC, RLC, MTP3B, SCCP, RANAP, M3UA, CC, MM, SMS, SM, SSSAR, and RNSAP.
For comprehensive understanding of the enhancements introduced to the protocol product series, please visit Protocol Analyzers web page.
- TRAU ToolBox™ and Analysis
•Supports AMR -WB codec with data rates of 6.60 kbps, 8.85 kbps, 12.65kbps
•Number of active streams for compression or decompression for HR codecs was limited to one stream in earlier versions. In T1E1 analyzer ver5.13, we can have multiple streams for HR
•AMR and HR is implemented using Voice Age codec library
For comprehensive understanding of the enhancements introduced to the Trau protocol product series, please visit TRAU ToolBox™ and Analysis web page.
- Multi-Class ML-PPP Emulator
•The Command Line Interface of MC-MLPPP Emulator has been updated and made backward compatible for the scripts in earlier version of T1/E1 analyzer
•Minimum value of Payload length & Fragment length is reduced to 1, i.e. PL ranges from 1 to 10,000, and FL ranges from 1 to 1500. Maximum Hex String Length is now increased to 600 bytes.
For comprehensive understanding of the enhancements introduced to the MC ML-PPP protocol product series, please visit Multi-Class ML-PPP Emulator web page
•The "tx server file" command in Error Insertion module of WCS has been modified to transmit data on multiple cards which has improved the performance of the tester
For comprehensive understanding of the enhancements introduced to the protocol product series, please visit Windows Client-Server web page.
About GL Communications Inc.
Founded in 1986, GL Communications Inc. is a leading supplier of test, monitoring, and analysis equipment for TDM, Wireless, and VoIP networks. Unlike conventional test equipment, GL's test platforms provide visualization, capture, storage, and convenient features like portability, remotability, and scripting.
GL’s TDM Analysis & Emulation line of products includes T1, E1, T3, OC-3, STM-1, analog four-wire, and analog two-wire interface cards and solutions. Capabilities include voiceband traffic analysis and emulation across all traffic types (voice, digits, tones, fax, modem), all protocols (HDLC, ISDN, SS7, CAS, GSM, GPRS, CDMA), and with capacities up to thousands of channels.
GL’s VoIP products generate / analyze thousands of calls simultaneously with traffic types such as voice files, digits, tones, noise, and fax using G.711, G.729, AMR, EVRC, and GSM codecs. Additional features include visual analysis, real-time listening, recording, and voice quality assessment using ITU algorithms PAMS, PSQM, and PESQ.
GL’s Wireless Products perform protocol analysis and voice quality assessment on GSM, CDMA, UMTS, and CDMA 2000 networks. Connections can be made to any wireless phone with automated call control, GPS, mapping software, and real-time signal measurements.
GL’s Echo Canceller testing solutions provide the broadest range of simulation and analysis, including compliance testing per G.168 and G.160. Network Surveillance and Monitoring products include Probes for TDM, VoIP, ATM, and Wireless networks.
GL’s Handheld data testers provide convenience, economy, and portability for almost any interface, including RS232, RS422 / RS530, X.21, T1, E1, T3, E3, and many others.
GL’s Network Surveillance and Monitoring products include Probes for TDM, VoIP, ATM, and Wireless networks. An open standards based approach provides a scalable, feature rich, real-time access to network intelligence. Centralized or distributed access, efficient transport and database loading allow compatibility with 3rd party and standards based monitoring systems.
For more information about GL’s complete line of products, please contact:
Phone: 301-670-4784 ext. 114