How to use a Single / Double Wall Carbon Nanotube AFM Probe
(PRWEB) December 3, 2008
The Single or Double Walled Carbon Nanotubes (CNT) at the end of the tips are grown by chemical vapour deposition and are ready to use, no shortening or post processing is necessary.
NANOSENSORS CNT probes are Single/Double Wall Carbon Nanotube SPM probes with a tip diameter between 2 and 3 nm. Compared to other Carbon Nanotube probes available on the market today that are mostly multiwalled carbon nanotubes the tip radius of NANOSENSORS™ Carbon Nanotube AFM tips is considerably smaller. They are therefore very suitable for high resolution measurements of nanometer-sized features.
The small tip radius achieved by a single or double wall carbon nanotube probe combined with the wear resistance of the CNT material compared to other materials makes it the ideal probe for high resolution imaging of flat surfaces.
NANOSENSORS™ CNT AFM probes are now the probes with the highest resolution capabilities in the NANOSENSORS product range.
The CNT probes are designed for high resolution measurements in Tapping Mode or Non-Contact Mode operations in air or vacuum
Due to their elastic properties Single / Double Wall CNTs are dedicated for the use on soft matter as well as on hard surfaces.
Because of the same elastic properties NANOSENSORS™ Single / Double Wall CNT probes are not suitable for measuring high aspect ratio features like very deep and narrow trenches or contact holes and should only be used by the experienced AFM user. They require special care to enable the user to profit from their unique properties and achieve good results. For this reason NANOSENSORS™ will add a guideline called "How to use a Single / Double Wall Carbon Nanotube AFM Probe " to every delivered package of CNT probes. The NANOSENSORS™ CNT Probes will be available in package sizes of two and of five probes.
NANOSENSORS™ is specializing in the development and production of innovative high quality probes for scanning probe microscopy (SPM) and atomic force microscopy (AFM). The products are especially designed for scientists at universities, research institutions and industrial R&D centres in the fields of nanotechnology, microtechnology, materials research, semiconductors, biology, biotechnology, chemistry and medicine. NANOSENSORS™ is a trademark of NanoWorld AG.
Rue Jaquet-Droz 1
Case Postale 216
phone: +41 (0)32 720 5085
fax: +41 (0)32 720 5792