Drexel Metals LLC has Officially Received 2007 Florida Building Code Approvals for Several of Their Metal Roofing System
Drexel Metals LLC has officially received 2007 Florida Building Code approvals for several of their Metal Roofing Systems.
Clearwater, FL (PRWEB) April 22, 2009 -- Drexel Metals LLC has officially received 2007 Florida Building Code approvals for several of their Metal Roofing Systems. "Drexel Metals' engineered Metal Roof Systems will allow Drexel to support and provide our customers all their needs within the state of Florida", states Rich Carroll, General Manager, Clearwater branch. For more information please contact Julie Coggins of Drexel Metals at 877-399-3600.
The following products have been FBC Approved:
| | - 180 degree seam over Plywood Deck
- DMC 150 SS FL# 12114.2 1-1/2" Standing Seam Roof Panel, .032" Aluminum, 16" Wide, 180 degree seam over Plywood Deck
- DMC 175 S FL# 12114.3 1-3/4" Snap Lock Roof Panel, 24 Ga. Steel, 18" Wide over Plywood Deck
- DMC 175 S FL# 12114.4 1-3/4" Snap Lock Roof Panel, 0.040" Alum., 17-1/2" Wide over 22 Ga. Metal Roof Deck
- DMC 175S FL# 12114.5 1-3/4" Snap Lock Roof Panel, 0.040" Aluminum, 17-1/2" Wide over Plywood Deck
- DMC 200 SS FL# 12114.6 2" Standing Seam Roof Panel, 24 Ga. Steel, 16" Wide, 180 degree seam over 22 Ga. Metal Roof Deck
- DMC 5V CRIMP FL# 12114.7 5V Roof Panel, 26 Ga. Steel, 24" Wide over Plywood Deck
- DMC 100 NS FL # 12174.1 1" Nail Strip; 24 Ga. Thick, 16" Wide Steel Roof Panel Non HVHZ100
- DMC 150 SL FL# 12174.2 1-1/2" Snap Lock Roof Panel; 24 Ga. Thick, 16" Wide Steel Roof Panel Non HVHZ
- DMC 150 SS FL# 12174.3 1-1/2" Steel Standing Seam Roof Panel; 24 Ga. Thick, 16" Wide, 90 degree seam, HVHZ
- DMC 175 SS FL# 12174.4 1-3/4" Aluminum Snap Lock Roof Panel; 0.032" Aluminum, 14" Wide over 15/32" Plywood Non HVHZ
- DMC 200 SS FL# 12174.5 2" Steel Standing Seam Roof Panel; 24 Ga., 16" Wide, 180 degree Seam over 15/32" Plywood Non HVHZ
- DMC 200 SS FL# 12174.6 2" Aluminum Standing Seam Roof Panel; 0.040" Aluminum, 16" Wide, 180 degree Seam over 15/32" Plywood Non HVHZ
|
About Drexel Metals LLC
Drexel Metals is a provider of fully engineered on-demand standing seam metal roofing systems that are supplied through its network of regional manufacturers known as the DMARM (Drexel Metals Association of Regional Manufacturers). Drexel's metal roofing has an industry leading 7 Miami-Dade approved roofing systems. In addition to metal roofing, Drexel also supplies highly efficient photovoltaic solar roof systems. Drexel Metals' solar products are engineered to work with Drexel Metals' roof systems, flat roof applications or in commercial and residential retrofit applications.
To learn more about Drexel Metals LLC, visit www.drexmet.com. Please direct all press inquires to Rob Waite (888-321-9630 ext 157)
###
|
