The PX14400's advanced performance, high degree of flexibility and scalability continues to demonstrate Signatec's commitment to its customers
Newport Beach, California (PRWEB) September 15, 2009 -
Signatec Inc. today announced the PX14400 high-speed digitizer, the industry's most advanced wideband and high dynamic range A/D board. The PX14400 captures signal frequencies up to 200 MHz, when using the programmable gain amplifier in 1 dB steps for maximum gain attenuation flexibility, or up to 400 MHz, if the direct transformer coupled connection is employed for the cleanest possible signal path to the ADC. 1 GB of on-board memory configured as a large FIFO and a PCIe x8 bus ensures Signatec's PX14400 can continuously sustain long recordings at over 1.2 GB/s through the PCIe x8 bus to PC disk storage without any break in the analog record.
Of the two embedded Virtex®-5 FPGAs, one is expressly available for custom in-line signal processing. As a Xilinx Alliance Program partner, Signatec created standardized data and control interfaces that are customer accessible along with VHDL source code examples that demonstrate the use of these interfaces to simplify real-time processing tasks through its optional firmware development kits.
"The PX14400's advanced performance, high degree of flexibility and scalability continues to demonstrate Signatec's commitment to its customers," said Anthony Hunt, Chief Technology Officer at Signatec. "By relying on the Virtex-5 FPGA family to deliver embedded processing and serial transceiver capabilities, combined with Signatec's growing suite of development libraries for FPGA programming, Signatec delivers exceptional value for engineers in the aerospace, defense and intelligence communities."
Precise Sampling Rate Flexibility
Beyond its high-speed, multi-channel, high-resolution performance capabilities, the PX14400's frequency synthesized clock allows the ADC sampling rate to be set to virtually any value from 58 MHz to 400 MHz, offering maximum flexibility for sampling rate selection. Additional divide-by-2 circuits are provided for sampling at even lower frequencies. This frequency selection flexibility comes at no cost to the acquisition clock quality/performance when locked to either the onboard 10 MHz, 5 PPM reference clock or to an externally provided 10 MHz reference clock. The ADC may also be clocked from an external clock source.
This level of accurate clock tuning without sacrificing performance gives the best integrated onboard ADC clock flexibility in the industry. Users no longer need to settle for fixed clocks or limiting divide-by-2 clocks only. This feature is ideal for undersampling applications, where the Nyquist bands need to be perfectly tuned to optimally place the center frequency of the sampled signal into the middle of the Nyquist zone and to optimize for the total bandwidth or data captured. In addition to the onboard clock capabilities, the ADC may also be clocked from an external clock source.
Up to five PX14400 boards may be interconnected in a Master/Slave configuration via a ribbon cable that connects at the top of the board. In this configuration, clock and trigger signals from the Master board drive the Slave boards for synchronized sampling across all boards. Additional boards can be synchronized, even across computer chassis, when using Signatec's Sync1500-6 product. The PX14400 supports single shot, segmented, and pre-trigger triggering modes.
In Segmented Mode, "time stamps" allow for storing the time relationship between the memory segments. Time Stamps are 64 bit timer values with a clock resolution of 5.0 nanoseconds, and are accumulated in a 2048 element FIFO memory separate from the data. If necessary, time stamps may be read during acquisition in order to prevent overflow. This is possible in any acquisition mode.
"Signatec's PX14400 is one of the highest-performance digitizers available on the market today," said Tom Wagner, Director of Marketing for Signatec, Inc. "Users can stream the two synchronized wideband, high-resolution A/D channels directly to Signatec's high-speed, turnkey RAID storage systems or into the high-performance Xilinx Virtex-5 FPGA with embedded programs such as FFTs, FIRs, DDC and channelization to process their signal data in real-time."
Pricing and Availability
Signatec's PX14400 is currently shipping with a 4-8 week delivery forecast. For the latest pricing and availability information, please contact Tom Wagner, Signatec's Director of Marketing.
About the Xilinx Alliance Program
The Xilinx Alliance Program is composed of companies with the best available technologies in the areas of IP cores, EDA, DSP, and embedded development tools, as well as design services, board-level products, integrated circuits, and electronic components. Participating companies provide optimized products and services that contribute to a broad selection of industry-standard solutions dedicated for use with Xilinx FPGAs.
About Signatec, Inc.
Delivering advanced system solutions since 1988, Signatec is a leading designer and manufacturer of high-speed data acquisition, parallel digital signal processing, continuous signal data recording and arbitrary waveform generation systems. Signatec differentiates itself by being one of the only single-source suppliers that works with its customers to build affordable, real-time signal technology systems for advanced radar, SIGINT, ultrasound, imaging and other high-speed communications systems. For more information, visit Signatec online at: http://www.signatec.com