And there’s no more calling us to say the stakes got run over by a dozer. There’s no downtime. Nobody has to watch the operators; they can dig, back up, find the next place to cut and keep on going.
Norcross, GA. (Vocus) June 25, 2010
A 3D excavator guidance system is helping the earthmoving subcontractor to beat the schedule by 15 percent on a $9-million channel repair project for the U.S. Army Corps of Engineers in Topeka, Kansas.
Ebert Construction Co., Wamego, Kansas, is using Leica Geosystems machine control systems on its excavators to help reshape 2.5 miles of the channel at Soldier Creek, which is contained by two parallel levees spaced 300 feet apart. A major flood in 2005 eroded the creek banks and this project will repair the damage, helping to prevent further flooding upstream of the repaired area. Ebert has engaged a fleet of earthmoving equipment to remove 350,000 cubic yards of earth from the side slopes and take them to waste areas behind the levee. Some 170,000 cubic yards are being moved from cuts to fills on the slopes
Two Komatsu hydraulic excavators, each fitted with a Power Digger 3D machine control system from Leica Geosystems, are being used to shape the side slopes. Each slope is designed with an upper and a lower bank, both on a 3:1 slope and separated by a gentler 10:1 slope.
Jim Ebert, project manager for the contractor, says the Leica Power Digger 3D systems improve the excavators’ efficiency because no grade checking is needed. He further states that the systems save Ebert $40,000 a year by eliminating the grade checker. The Power Diggers’ screens show the operators the cuts and fills on a continuous basis. “Plus”, says Ebert, “we can work underwater without having a grade checker climb into the water,” he says.
“The Leica Geosystems GPS system takes the guesswork out of grading for the operators,” says Trent Ebert, project superintendent. “And there’s no more calling us to say the stakes got run over by a dozer. There’s no downtime. Nobody has to watch the operators; they can dig, back up, find the next place to cut and keep on going.”
Completion is scheduled for February 2011, but the contractors hope to achieve substantial completion before winter.
For additional product information, visit http://www.leica-geosystems.us/en/Leica-PowerDigger-3D_81272.htm
Leica Geosystems – when it has to be right
With close to 200 years of pioneering solutions to measure the world, Leica Geosystems products and services are trusted by professionals worldwide to help them capture, analyze, and present spatial information. Leica Geosystems is best known for its broad array of products that capture accurately, model quickly, analyze easily, and visualize and present spatial information.
Those who use Leica Geosystems products every day trust them for their dependability, the value they deliver, and the superior customer support. Based in Heerbrugg, Switzerland, Leica Geosystems is a global company with tens of thousands of customers supported by more than 3500 employees in 28 countries and hundreds of partners located in more than 120 countries around the world. Leica Geosystems is part of the Hexagon Group, Sweden.
For further information please contact:
Leica Geosystems Inc.
Director of Marketing
Atlanta, GA 30092
Phone: +1 (770) 326-9557
Fax: +1 (770) 447-0710