Mold and Asbestos Removal in Fresno Now Much Easier with Financing through Mold Solutions Inc

Share Article

Mold and Asbestos Removal in Fresno CA is much easier for homeowners now that Mold Solutions Inc has teamed up with a financial partner. This is a new concept for this type of work and very helpful in these tough economic times.

Mold and Asbestos Removal in Fresno
Mold inspection and mold removal by the same company is a conflict of interest!
See Mold Scams 101 at www.moldsolution.org

Mold and asbestos in the home is not something any homeowner wants to deal with. It can be harmful to occupants and is expensive to remove properly. Mold and asbestos removal is now easier for homeowners since Mold Solutions Inc of Madera has teamed up with a financial partner to offer loans to cover the costs for removal.

When a homeowner has roof, plumbing or other type of leak that causes water or mold damage in their home, they will usually file a claim with their insurance company. Many times they find that the loss is not covered due to the cause of the leak. Very few insurance companies offer mold coverage and if they do, the coverage does not normally cover all of the costs.

The typical cost for professional mold removal work in residential homes is between $2,000 to $3,500 dollars. In this tough economy many homeowners have a hard time coming up with the money needed for the work. Safe and professional mold and asbestos removal involves containing the area with a airtight containment made of plastic sheeting and removing the mold contaminated or asbestos containing materials under negative air pressure to prevent the release of mold spores or asbestos fibers into other areas of the home.

Some homeowners will do the work themselves to save money or hire a handyman or regular contractor to do the work, not realizing the dangers that mold and asbestos can cause to their health. Mold Solutions Inc uses trained and certified professional technicians for all of their work and is the only local mold and asbestos removal company where the owner of the company starts each and every job. They strongly believe in "old school" customer service and quality control. Their staff have over 35 years of combined experience.

The job start times are staggered their each morning so that the owner can personally go over the scope of work with the crew supervisor and answer any questions that the homeowner may have before the work starts.

Mold Solutions Inc. also specializes in and has a reputation for saving property owners money for the re-construction work after the mold is removed. An example would be a leak behind a kitchen cabinet that causes mold to grow on the walls behind the cabinet. With the years of experience that their technicians have, they can usually remove the cabinet intact, remove the mold contaminated materials from the wall behind the cabinet then clean and save the cabinet for re-installation after the drywall repairs are made.

They have completed hundreds of such projects and have saved homeowners and insurance companies thousands of dollars over the years. All of their estimates are free in the greater Fresno area. Mold Solution Inc's office is located in Madera, CA ( just outside of Fresno on the Hwy 41 Business Route) and their service area includes Central California, from Bakersfield to Modesto.

For more information visit their website at http://www.moldsolution.org or call (559) 440-9178.

###

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Valina Wisner
Visit website