Emerson Network Power Launches DS1200DC-3 Digitally Programmable 1200 Watt DC-input Bulk Front-End Power Supply

Share Article

Features telecom standard input and is GR-1089-CORE Issue 4 compliant

http://www.powerconversion.com/assets/1299734302-st.jpg

DS1200DC-3

Emerson Network Power, a business of Emerson and the global leader in enabling Business-Critical Continuity™, today launched the DS1200DC-3, a high-efficiency dc-input 1200 watt bulk front-end power supply for systems that use distributed power architectures. The new DS1200DC-3 power supply is digitally programmable via an I2C interface and is PMBus compliant. It provides a very flexible and cost-effective means of accommodating the high bulk power demands of today’s networking equipment.

Developed specifically for systems co-located with telecom and central office applications operating from 48 V battery plants, the new DS1200DC-3 power supply has a wide input voltage range of -40 to -72 Vdc. In addition to its main +12 Vdc output, which can deliver up to 100 amps continuously, the power supply also generates an auxiliary ‘always on’ output for powering standby circuitry.

Housed in a compact plug-in rack-mounting module, the Emerson Network Power DS1200DC-3 has a 1U x 2U form factor – it measures just 1.6 inch (4 cm) high by 3.2 inch (8.1 cm) wide. Use of the latest power conversion topology means that it has a very high efficiency – typically in excess of 85 percent at half load – and a power density of 21.7 W/in3 (1.3 w/cm3). The power supply has an operating temperature range of minus 10 to 55 degrees Celsius and features a built-in cooling fan with automatic speed control; forward and reversed airflow versions are available to simplify integration with the rack’s cooling layout.

The DS1200DC-3 power supply feature active current sharing, which operates from 10 to 100 percent of full load, allowing multiple supplies to be paralleled for very high current applications. The supplies are hot pluggable, have no minimum load requirement, and incorporate low-loss internal ORing Field Effect Transistors (FETs) on the main 12 V output, for fault-tolerant and N+1 redundancy applications. The DS1200DC-3 also supports active current sharing with its ac-input DS1200 series counterpart, enabling users to implement mixed ac/dc input power schemes very easily.

The Emerson Network Power DS1200DC-3 offers users a choice of a 3.3 Vdc or 5 Vdc auxiliary output, rated at 6 A and 4 A respectively. The main +12 Vdc output and the auxiliary output are both regulated to within plus or minus 5 percent for all permissible input, load and temperature conditions, with output ripple on the 12 V output kept to a maximum of 120 mV p-p. The 12 V output is adjustable by plus or minus 5 percent via the I2C interface bus and can be set to a very high accuracy of plus or minus 0.2 percent.

The DS1200DC-3 power supply fully complies with the rigorous standards for conducted and radiated EMI – and input transient protection – of GR-1089-CORE Issue 4. It is also comprehensively protected against fault conditions, including overcurrent, overvoltage, undervoltage and overtemperature. Both dc outputs feature auto-recovery from an overcurrent condition; the main 12 V output will latch off if the condition persists for more than a second.

Front panel bi-color LEDs provide visual indication of the power supply’s operational status for local diagnostic purposes, and this data can also be retrieved via the I2C interface bus by the system under power for preemptive action. The DS1200DC-3 also contains an EEPROM (electrically erasable programmable read-only memory) that is pre-programmed with data about the unit – including its type, serial number and date of manufacture – to facilitate replacement in the field.

The Emerson Network Power DS1200DC-3 power supply is designed for NEBS compliant systems and carries a comprehensive set of international safety approvals, including UL/cUL 60950, NEMKO+ CB 60950, EN60950, CE Mark and China CCC. The power supply is also fully compliant with the Restriction of Hazardous Substances (RoHS) per EU directive 2002/95/EC.

Emerson Network Power’s DS1200DC-3 power supply has a demonstrated mean time between failure (MTBF) of 500,000 hours, running at full load and 40 degrees Celsius, and is backed by a comprehensive two year warranty. For additional information, visit http://www.powerconversion.com/products/websheet/441/DS1200DC.

A high resolution photo of the DS1200DC-3 is available at https://www.powerconversion.com/assets/1299734302-st.jpg

About Emerson Network Power
Emerson Network Power, a business of Emerson, is the global leader in enabling Business-Critical Continuity™ from grid to chip for telecommunication networks, data centers, health care and industrial facilities. Emerson Network Power provides innovative solutions and expertise in areas including AC and DC power and precision cooling systems, embedded computing and power, integrated racks and enclosures, power switching and controls, infrastructure management, and connectivity. All solutions are supported globally by local Emerson Network Power service technicians. For more information on Emerson Network Power's embedded power products and services for original equipment manufacturers and system integrators visit http://www.Emerson.com/EmbeddedPower. Learn more about Emerson Network Power products and services at http://www.EmersonNetworkPower.com.

About Emerson
Emerson, based in St. Louis, Missouri (USA), is a global leader in bringing technology and engineering together to provide innovative solutions for customers in industrial, commercial, and consumer markets through its network power, process management, industrial automation, climate technologies, and tools and storage businesses. Sales in fiscal 2010 were $21 billion. For more information, visit http://www.Emerson.com.

Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. All other product or service names are the property of their respective owners. © 2011 Emerson Electric Co.

# # #

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Shreekant Raivadera
Emerson Network Power
+44-116-267-7396
Email >

Connie Schultejans
Emerson Network Power
+1-602-438-3436
Email >
Visit website