Magnalight Closes Performance Gap with Release of LED Spotlight with Tighter Spot Beam Pattern

Share Article

Larson Electronics’ Magnalight announced today the newest addition to its line of high grade LED spotlights designed for rugged use and precise light control. The Magnalight LEDLB-21-3C-R 21 Watt LED Spotlight produces a 1,750 lumen light beam capable of reaching over 500 feet in length without the typical beam spread associated with LED spotlights. Using advanced reflector design and high intensity Cree LEDs, this LED spotlight produces a tighter spotlight beam than typical LED spotlights while retaining the light quality and intensity Magnalight spotlights are known for.

The Magnalight LEDLB-21-3C-R 21 Watt LED Spotlight produces a 1,750 lumen light beam capable of reaching over 500 feet in length.

This CREE based LED light really represents Magnalight’s latest advancements in projection of LED light

Producing 1,750 lumens and capable of operating on voltages ranging from 9 to 42VDC, the Magnalight LEDLB-21-3C-R 21 Watt LED Spotlight closes the performance gap between LEDs and standard spotlight designs. While many LED spotlights outperform most incandescent lamps in terms of efficiency and light quality, LED spotlights tend to produce spot beams with a wider spread at the extreme end of their range. This LED spotlight from Magnalight closes this performance gap through the use of advanced optics and reflector assemblies to produce a tight spot beam extending up to 600 feet in length, yet only 45 feet wide at its farthest range. This tight spot pattern makes this unit ideal for professional services such as those found within the law enforcement, security and military industries where precise illumination and light control are often needed. This LED spotlight produces this performance without any loss of the advantages normally gained with LEDs. This unit produces 1,750 lumens yet draws only 21 watts at 1.6 amps, making it a highly efficient light source capable of being operated for extended periods without draining a vehicle’s battery. The Edixion emitters in this LED unit contain Cree EZBright® three watt LEDs, ensuring the best in LED power and quality while providing excellent durability and a 50,000 hour LED operational life that typical incandescent and HID spotlights cannot match. This LED spotlight is designed for versatility and rugged operation as well, with an IP67 rated housing for weatherproof reliability and a polycarbonate lens to provide protection against the impacts with rocks or debris often encountered when mounted on vehicles or ATVs. A stainless steel adjustable U-bracket with single mounting stud allows operators to adjust the unit’s position once mounted and provides simple yet rugged mounting options while the internal LED drivers allow operation with any voltage ranging from 9 to 42 VDC. These mounting and power options make these spotlights ideal for installation on vehicles, boats, ATVs and equipment which commonly utilize 12 or 24 volt electrical systems. Small, efficient and powerful, the well focused beam and reliable operation of this unit makes it ideal for applications where precise light control and dependability are a must.

“This CREE based LED light really represents Magnalight’s latest advancements in projection of LED light,” said Rob Bresnahan with Larson Electronics’ magnalight.com. “While a lot of LED lights are available in the marketplace to be used as LED fishing lights or LED boat lights, our line of LED lights deliver definitive, tight spot beams and very even flood beams, depending on configuration. Our focus is really on optics, and we have designed a family of optics that when combined with the CREE LEDS, generate a tight spot beam or a wide flood beam with minimal amp draw. Moreover, we have been selling LED lights into the commercial fishing market for years and we really understand how to make these LED lights waterproof. You can always get a light certified for IP67 or IP68, but still have moisture issues. We have learned over the years which environmental nuances create problems and we design housings and seals to overcome the wide variety of application challenges that create problems. So, we feel that the Magnalight LED boat lights really represent the best combination of forward light projection, minimal amp draw and watertight construction. The LEDLB-21 series, for example, projects a tight ‘circle’ of light on a distant target. You can’t find other LED products on the market today that will mimic the tight round beam produced by halogen or HID spotlights.”

Magnalight by Larson Electronics has provided industrial grade spotlights and lighting equipment to the military and industrial sectors since 1967 and manufactures and sells a wide variety of LED spotlights, HID spotlights, LED work lights and LED light bars. Visit Magnalight.com to view the entire line of Magnalight spotlights or call them at 1-800-369-6671 or 1-214-616-6180 for international inquiries to learn more or discuss special ordering requirements.

###

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Rob Bresnahan
Visit website