CADsoft Consulting Hosts Stormwater Management Seminar

Share Article

A Storm and Sanitary Analysis Symposium to be attended by local municipalities, government agencies, and engineering firms.

News Image

CADsoft Consulting Inc., a premier provider of technical design and engineering solutions, and trusted advisor to AEC professionals who use advanced technology to accurately and productively model and realize their designs, is hosting February 23, 2012 a seminar focused on the engineering and technical issues associated with the planning, engineering, and construction of stormwater management requirements.

Presented by Steve Stamatoplos, Autodesk Civil Technical Specialist, who will share his over 30 years of expertise in civil engineering on how to utilize Autodesk solutions to effectively address stormwater concerns. The Autodesk Storm and Sanitary Analysis 2012 Extension is a comprehensive, hydrodynamic hydrology and hydraulic analysis application for planning and designing urban drainage systems, storm sewers including highway drainage systems, and sanitary sewers. With the Storm and Sanitary Analysis extension, engineers and planners are using AutoCAD Civil 3D 2012 and/or AutoCAD Map 3D 2012 software to analyze both simple and complex networks

The seminar will include demonstrations of designing a storm water management system. Building upon data from a drainage planning study, attendees will learn how to do a surface analysis and determine drainage catchments, model a pipe network in Civil 3D and then share the pipe network and catchment information with Autodesk Storm and Sanitary Analysis Extension. Once the system has been refined, the Civil 3D model is used to prepare reports for regulatory review. This demonstration will incorporate techniques for Low Impact Development (LID), an innovative approach to stormwater management that is being promoted by federal agencies, state and local governments for regulatory compliance.

About CADsoft Consulting
CADsoft Consulting is an Authorized Autodesk Value Added Reseller offering full-service consulting, training and support on a national basis. For the past 21 years, CADsoft Consulting’s unique services are sought after by an impressive list of architectural firms, engineering companies, government agencies, and academic institutions. CADsoft Consulting is an Autodesk Value Added Reseller for architecture, engineering, construction, civil engineering, geospatial, utilities, and academic solutions. They are an Autodesk Premier Solutions Provider for Gold Support, Civil Engineering and Government Solutions. In addition, CADsoft is an Autodesk Authorized Training Center (ATC) with locations in Tucson & Tempe, Arizona, and Albuquerque, New Mexico. For more information, please visit our website: http://www.cadsoft-consult.com.

Autodesk, AutoCAD, Civil 3D, and ATC are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.

# # #

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Mary Macdonald
Visit website