New – Snap-in and Hybrid Lithium-Ion CarbonCap Cylindrical Ultracapacitors from Cornell Dubilier

Share Article

CDHC Hybrid Capacitors are half ultracapacitor and half lithium ion battery. These hybrid capacitors store more than twice the energy of typical ultracapacitors and have high cycle life capability compared to batteries. These cells can relieve batteries of burst power functions, thereby reducing costs and maximizing space and energy efficiency.

The new snap-in units are available in 2 and 4 pin versions and are well suited for wind turbine blade pitch control.

Cornell Dubilier's NEW! CDLC Ultracapacitors

The higher energy of hybrid capacitors makes them especially suitable for use in LED lighting and emergency pulse applications, e.g. operation of electric doors and windows.

Cornell Dubilier Electronics, Inc. (CDE) announces the release of Type CDLC, CarbonCap Double Layer Capacitors, and Type CDHC hybrid ultracapacitor s. Cornell Dubilier's lineup of large cell cylindrical ultracapacitors spans 1200 to 3000 farads; snap-in style ultracapacitors from 100 to 600 farads and higher energy hybrid capacitors from 220 to 1000 farads.

CDHC Hybrid Capacitors are half ultracapacitor and half lithium ion battery. These hybrid capacitors store more than twice the energy of typical ultracapacitors and have high cycle life capability compared to batteries. Hybrid capacitors have more power than lithium ion batteries, but less energy storage. By comparison, ultracapacitors have a cycle life capability of a million cycles or more, batteries have a cycle life of around 1000 cycles and hybrid capacitors, more than 20,000 cycles. While the ultracapacitors have a usual working voltage range of 1.3 to 2.7 V, hybrid capacitors operate from 1.0 to 2.3 V. The higher energy of hybrid capacitors makes them especially suitable for use in LED lighting and emergency pulse applications, e.g. operation of electric doors and windows.

Type CDLC CarbonCap Ultracapacitor Cells are available with axial, M12 threaded mounting studs on both ends as well as additional mounting options. The new snap-in units are available in 2 and 4 pin versions and are well suited for wind turbine blade pitch control.

The large ultracapacitors handle back-up and pulse power applications such as grid stabilization. They also excel in transportation applications like automotive subsystems, rail system power and utility vehicles. They provide extended power allowing critical information and functions to remain available during dips, sags, and outages in the main power source. These cells can relieve batteries of burst power functions, thereby reducing costs and maximizing space and energy efficiency. Units with axial cylindrical design enables low ESR and high peak currents with an electrostatic storage capability that can cycle a million charges and discharges without performance degradation.

Type CDLC can work in parallel with batteries for applications that require both a constant power discharge for continual function and a pulse power for peak loads. The CDLC delivers

the peak power thus reducing the peak current from the battery and extending battery life and reducing battery size and cost.

Both series are available now with prices starting at $10.00 each. Full specifications are available at http://www.cde.com. For application support contact Robert Sevigny at rsevigny@cde.com or 508-996-8561 ext. 128.

Cornell Dubilier is a leading capacitor manufacturer with facilities in New Bedford MA, Liberty SC, Mexicali Mexico and Shenzhen China. Dedicated to capacitor solutions for power electronics, it excels with aluminum electrolytic, mica, motor run, and AC and DC plastic film capacitors. The world leaders in welders, UPS systems, motors, drives, avionics, power and military electronics and medical lasers are prominently among its more than 35,000 customers.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Robert Sevigny
CORNELL DUBILIER
(508) 996-8561 128
Email >