Contoocook, NH (PRWEB) April 30, 2012
MadgeTech, Inc. will be exhibiting at the Interphex exhibition from May 1st through the 3rd in New York, New York. The show features a full spectrum of products and services for the pharmaceutical and biopharmaceutical industries. MadgeTech will be highlighting the PR140, HiTemp140 and Therm•A•lert data logger series.
The PR140 is a pressure data logger designed for use in autoclave validation and mapping. This rugged device can withstand temperatures up to 140°C and is completely submersible (IP68).
The PR140 has an accuracy of ±0.03 Bar (±0.435 PSI), which can be achieved over a wide temperature range, from 20°C to +140°C (68°F to 284°F). It can be programmed to take readings as often as once per second (1Hz), and has non-volatile memory that can store up to 32,700 measurements.
MadgeTech’s HiTemp140 is a rugged stainless steel data logger, designed for validating temperatures within autoclaves. This submersible device can be placed in and measure temperatures up to 140°C. The HiTemp140 is available in several probe lengths, including rigid 1”, 2”, 5.25” and 7” models, and is also offered in a 24” flexible probe version.
The Therm•A•lert series consists of two way wireless data loggers for measuring and recording temperature and humidity. Three models are available, including an ambient temperature model (Therm•A•lert), a temperature and humidity model (Therm•A•lert-RH), and an external temperature probe model (Therm•A•lert-P).
The Therm•A•lert series is designed for use in applications such as refrigerator, freezer and storage area monitoring. The devices can be placed in and monitor temperature from -4 to 176°F (-20 to +80°C) and humidity from 0 to 95%RH. The external probe model can measure an extended range from -328 to +500°F (-200 to +260°C).
Visit MadgeTech’s booth, number 2162, at Interphex to receive literature and demonstrations of these featured products, as well as MadgeTech's full line of data loggers for the pharmaceutical industry.