(PRWEB) May 17, 2012
Eastern Laser launches new DF series glass laser CO2 laser marker. CO2 glass tube laser marking machine is mainly used to engrave and mark non-metal materials, which enjoys the features of high speed, high precision and high efficiency. CO2 DF series glass laser CO2 laser marker can be used for dealing with wood, paper, leather, cloth, Plexiglas, epoxy, acrylic, plastic, unsaturated polyester resin and other non-metal materials.
YAG and CO2 are the most common types of lasers used for laser equipments. Both CO2 lasers and YAG lasers generate a very concentrated beam of light, but from there the lasers become very different in their uses and how they work. What are the different uses for YAG and CO2 lasers?
YAG lasers and CO2 lasers react very differently on different materials because of the differing wavelengths of the laser beams. The wavelength of a YAG laser (1.064 microns) is exactly ten times smaller than the CO2 wavelength of 10.64 microns, which makes it ideally suited for absorption in most metals, but this small wavelength inhibits its ability to be absorbed by many other materials (wood, acrylic, plastics, fabrics, etc.)
A CO2 laser beam is not easily absorbed by metal, but can easily be absorbed by many organic materials such as wood, acrylic, rubber, etc, while it tends to reflect off of most metal surfaces. It's the different wavelengths of the two beams that are mainly responsible for the different types of materials that they will react with.
This series laser machine adopts the industrial standardization module design. DF series laser marker adopts full China made glass CO2 laser tube, high speed scanning vibrating lens, extending focusing system, and high stability anti-intervention industrial computer system and high precision vertical up-and-down working table. The machine can work for 24 working hours continuously with high stability, high precision and high speed. The marking software is based on windows operational software, which is easy to operate.
Feature of the DF series glass laser CO2 laser marker by Eastern Laser:
1. High-speed marking on non-metal materials, the marking speed may achieve 230 characters per second.
2. Marking on the small area for leather or textile material cutting, with maximum marking area of 150mm*150mm.
3. Mechanism as well as the control system can be custom-made according to customer special requirements.