Columbus, OH (PRWEB) June 21, 2012
NUCON International Inc., Columbus, OH, a worldwide leader in providing gas, vapor and liquid phase adsorption solutions to the Nuclear Power and other industries, has announced the results of recent tests to determine the levels of mercury vapor that accumulate in mercury lamp storage and shipping containers when lamps inside the containers are broken. The study concluded that mercury vapor levels within containers containing broken fluorescent lamps exceed health and safety exposure limits and guidelines. NUCON also ran parallel tests using a new adsorbent technology and achieved more than 95 percent mercury vapor reduction within the same containers.
Tests were conducted by breaking fluorescent lamps inside a sealed vapor-containing bag and box in a specially designed test chamber and continuously measuring vapor levels inside the bag. The results indicated that opening a package containing broken fluorescent lamps and/or CFLs presents a significant risk of mercury vapor exposure, potentially rising well above both the OSHA 8-hour permissible exposure limit of 100 ug/m3 and the NIOSH (National Institute for Occupational Safety and Health) IDLH (immediately dangerous to life and health) level of 10,000 ug/m3.
NUCON ran multiple parallel tests using a new, patent-pending adsorbent substrate they developed in conjunction with VaporLok Products, LLC, Mankato, MN, http://www.vaporlokproducts.com. The new substrate was impregnated with carbon and treated with a variety of inert chemicals, effectively adsorbing and capturing the mercury vapor. This new, carbon-based adsorbent technology, called VaporLokCAPTURE™, is designed to adsorb mercury vapor from any device or product containing mercury. You can view a short animated depiction of this process at http://www.vaporlokproducts.com/capturedemo.
According to Louis Kovach, president of NUCON, “Our scientific testing indicated that vapor levels inside packages containing broken fluorescent lamps can exceed 300 times the 8-hour permissible exposure limit levels established by OSHA. With the addition of the adsorbent technology, these levels were reduced by more than 95 percent.”
With VaporLokCAPTURE™, approximately 60 percent vapor reduction is achieved in as little as 15 minutes after lamp breakage, keeping vapor levels below the NIOSH IDLH guideline. Download a white paper to learn more about the testing and test results at http://www.vaporlokproducts.com/capturewhitepaper.pdf.
NUCON designs and manufactures high efficiency filtration systems, testing instruments, activated carbon, carbon adsorption systems and solvent recovery systems, providing products and services ranging from laboratory studies to complete equipment installations. For additional information, Contact NUCON International, 7000 Huntley Road, Columbus, OH 43229. Phone (614) 846-5710.