The Reverse Mount Pedal Assembly positions the master cylinders inside of the firewall, while the Forward Mount Pedal Assembly positions the master cylinders outside of the firewall.
Camarillo, CA (PRWEB) July 25, 2012
If you are building a racecar, street rod or Pro-Touring vehicle you should be aware of Wilwood Disc Brakes new Adjustable Reverse Mount Pedal Assembly (part number 340-11299) or the new Forward Mount Pedal Assembly (part number 340-11295) that combines the brake and clutch pedals together in one unit.
The Reverse Mount Pedal Assembly positions the master cylinders inside of the firewall, while the Forward Mount Pedal Assembly positions the master cylinders outside of the firewall. Both units feature an all aluminum frame and forged aluminum pedal arms with ladder style construction. The pedal pads are of a special adjustable lightweight design that allows fine-tuning of the pedal location and clearance. Also included with the assembly of your choice are the mounting studs, hardware, clevis and pivot pin balance bar that are designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The units provide a 6.25 to 1 ratio on both clutch and brake pedal.
For more information contact: Wilwood Engineering at (805) 388-1188 and request to speak with Erika Gordillo for marketing issues, or Andy Fritts for technical questions. Also, Wilwood’s website is accessible or e-mail. For a high resolution brake kit assembly photo for printing please click here for the Adjustable Reverse Pedal Assembly and click here for Adjustable Forward Pedal Assembly.