Innodisk Leads the Way in New Trends for Industrial Flash Memory in 2013 -Advances in Firmware Design, SATA III and Miniaturization-

Share Article

Innodisk at a key embedded technology forum, DTF, recently spoke about new trends and challenges in the growing industrial flash market and the company's solutions to them. These trends include the development of firmware and hardware to best utilize MLC flash, adoption of the SATA III interface for industrial computing, as well as the industry wide trend of adopting Intel's NGFF specification.

Innodisk Logo
We have the ability to select the best MLC Flash memory”, says CC Wu, director of Innodisk's Embedded Flash Division, “and our proprietary firmware technologies make our iSLC products perform almost as well as SLC, while keeping a lower price.

Innodisk, a major designer and manufacturer of SSDs for industrial applications, recently spoke about new trends and challenges in the growing industrial flash market at the 2013 DTF (Digitimes Tech Forum) - Embedded Technology & Application, Taiwan's largest technology industry forum. Innodisk has been invited to speak at DTF for three years running. This year’s presentation centers on three new trends for industrial flash memory in 2013.

Trend 1: Back-end designs will determine the overall performance of Flash memory
Multi-Level Cell (MLC) Flash memory has been adopted faster than expected, but it has reliability and endurance limitations for industrial applications. Innodisk has developed technology to solve these problems and realize the true potential of MLC Flash, with their innovative back-end design of industrial SSD’s.

These innovations include thermal sensors to monitor temperature range, and internal heating pads to assure functioning of MLC Flash at low ambient temperature. Innodisk has developed our new iSLC technology with our own firmware design, introduced in the final quarter of 2012.

“We have the ability to select the best MLC Flash memory,” says CC Wu, director of Innodisk's Embedded Flash Division, “and our proprietary firmware technologies make our iSLC products perform almost as well as SLC, while keeping a lower price.”

Innodisk’s newly revised iSMART 3.0 monitoring tool analyzes all storage devices in a system. Users can observe some key features, including temperature, read/write performance, and lifespan of each Flash storage device. The latest iSMART tool can also be configured to alert users of the SSD wear-leveling status.

Trend 2: Adoption of SATA III is on the rise in industrial control applications in 2013
SATA III (6.0 GB/s) has been the mainstream data connection interface for consumer applications since 2011. The industrial market has relied on SATA II for older generation and current designs, but will look to SATA III for an increase in performance without sacrificing reliability.

As SATA III technology has matured, Innodisk has aggressively allocated R&D resources to develop faster SSDs over the past 6 months. After testing SATA III SSDs on the SATA II platform, we found a two-fold increase in read/write speeds. Innodisk introduced its first 2.5” SATA III SSD product line in the first quarter of 2013, and will release small form factor SATA III SATADOM and mSATA to the market later this year.

Trend 3: Small form factor devices will become mainstream
Small form factor devices will become the norm in the industrial sector in 2013, partly due to the industry's adoption of Intel's Next Generation Form Factor standard (NGFF) specification. This industry-wide trend of miniaturization allows data centers to pack more units in the same amount of space and enables a dramatic increase in data transfer speed.

Innodisk will introduce small form factor products based on Intel's NGFF specification in the second half of 2013. The company has already gained a foothold in the market for miniaturized modules, with its most important product line, SATADOM, with patented Pin 7 technology.

Innodisk believes these three trends of firmware design, SATA III adoption and miniaturization will drive industrial flash memory in 2013.

For the full article, please see: http://www.innodisk.com/AboutInnodisk/NewsDetail.aspx?bmV3c19Hcm91cElEPTQzOWI1OWQxLTIyOGMtNGNmZi04ODM1LWQ2MDI3OWUyMjc0ZSZuZXdzX2RmbElEPTAwMQ%3d%3d

About Innodisk
Founded in March of 2005, Innodisk Corporation has become the industry-leading manufacturer and solution provider of flash storage devices and DRAM modules for industrial applications and embedded systems, with a focus on the enterprise, industrial, aerospace, and defense industries. Unlike competitors, Innodisk has concentrated from the beginning on industrial NAND flash and SSD products. With its long experience and an unrivaled knowledge of the memory industry, Innodisk has developed a series of products with excellent quality, remarkable performance, great cost-efficiency, and the highest reliability.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Eric Zarshenas

Jessika Remolona
Innodisk USA
510-770-9421 106
Email >
Follow us on
Visit website