Outwater Introduces Its Tri-Mod LED Backlighting Panels for Translucent Surfaces

Share Article

Ideally suited for use in tight applications with less than one inch of installation depth, Outwater’s 1/16th inch thick Tri-Mod LED Backlighting Panels are a great way to uniformly backlight your graphics, posters and promotional messages without any hot spots or uneven light dispersion in stores, restaurants, museums and exhibit booths as well as commercial and residential buildings. In addition, Outwater’s Tri-Mod LED Backlighting Panels can also be readily used to illuminate all types of translucent surfaces including Onyx or Corian® countertops and backsplashes.

Tri-Mod LED Backlighting Panels for Translucent Surfaces

Outwater's Tri-Mod LED Backlighting Panels are a great way to uniformly backlight your graphics, posters and promotional messages or illuminate any type of translucent surface without hot spots or uneven light dispersion.

Ideally suited for use in tight applications with less than one inch of installation depth, Outwater’s [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC] 1/16th inch thick Tri-Mod LED Backlighting Panels are a great way to uniformly backlight your graphics, posters and promotional messages without any hot spots or uneven light dispersion in stores, restaurants, museums and exhibit booths as well as commercial and residential buildings. In addition, Outwater’s Tri-Mod LED Backlighting Panels can also be readily used to illuminate all types of translucent surfaces including Onyx or Corian® countertops and backsplashes.

Comprising recently introduced 2nd generation LED lighting with incorporated “LED Diamond Light Technology,” Outwater’s Tri-Mod LED Backlighting Panels generate low heat and no UV, yet produce the purest, brightest, white LED lighting available on the market with a Color Rendering Index of 80.

Offered in six different sizes, Outwater’s low voltage, prewired Tri-Mod LED Backlighting Panels are easy to install and interconnect to one another without soldering, and can be arranged in many diverse configurations to accommodate almost any type of application.

Constructed of virtually shatterproof fiberglass, each panel uses energy efficient, dimmable SMD3528 LED Chips, and is manufactured with constant current technology, thus allowing for an approximate life expectancy of 50,000 hours with minimal to no light degradation. Moreover, each LED chip has a beam spread of 120° and provides 720 Lumens or 5,500 LUX per square foot at an installation depth of 1-1/2-inches.

When utilized with Corian® Arctic Ice, Outwater’s RGB Tri-Mod LED Backlighting Panels further enable you to customize your counters and backsplashes to light up in any shade of seven different colors with the ability to remain static on any color. Outwater’s RGB Tri-Mod LED Backlighting Panels can also be programmed to morph colors at variable speeds as quickly as a strobe light or as slowly as a minute and a half per color.

Tri-Mod LED Backlighting Panels Product Summary:

  • Uniformly illuminates without any hot spots or uneven light dispersion
  • Just 1/16 inch thick
  • Less than one inch of installation depth required
  • Energy efficient
  • Dimmable
  • Virtually shatterproof fiberglass construction
  • Rated for 50,000 hours usage with minimal to no light degradation
  • Available in programmable RGB
  • Comes with a 3 year warranty

For further product information, please click the enclosed link:

Link #1: Outwater’s Tri-Mod LED Backlighting Panels

About Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC]: Outwater can be contacted Toll Free at 1-800-631-8375 (For sales and product information in the USA & Canada) / 1-201-498-8750 (For sales and product information outside of the USA & Canada) or viewed online at http://www.outwater.com

From the vendor of a single product in August 1972, Outwater, with sales and distribution facilities in New Jersey and Arizona, is recognized today as a well established international manufacturer and stocking distributor of more than 65,000 standard and innovative component products required by woodworkers, cabinet and furniture manufacturers, builders, remodelers, designers, architects, point-of-purchase and display fixturing manufacturers, OEM's, as well as a diversified range of other commercial and retail end users.

Major Product Categories include Plastic & Aluminum Extrusions; Lighting and Lighting Accessories; Furniture, Cabinet & Store Fixture Components; Knobs & Pulls; Casters; Fasteners; Laminates; The FOGA Exhibit & Display Fastening System; The Klem Connector; Literature Displays; Slatwall; Sign Holders; P.O.P Components; Display Motors & Turntables; Pedestals; Injection Molded Parts; Brass Tubing & Fittings; Surfacing Materials; Interior & Exterior Polymer & Wood Architectural Mouldings & Millwork; ORAC DECOR and DEM Architectural Mouldings & Millwork; Columns & Capitals; Balustrading; Wrought Iron Components; Decorative Stamped Steel & Polymer Ceiling Panels; Wainscoting; Wall Coverings; Fireplace Surrounds; Plastic "Glass" Block; Period & Contemporary Hardware; Kitchen & Bath Accessories; Kitchen & Bath Cabinetry and Vanities… and so much more!

Contact:
Joey Shimm, Director of Marketing
Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC
(201) 498-8750

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Visit website