IP Cores, Inc. Ships an FPGA Version of Its 100 Gbps MACsec Statistics IP Core

Share Article

IP Cores, Inc. (http://www.ipcores.com) announces shipment of an FPGA version of the statistics companion IP core for its popular 100 Gbps MACsec (IEEE 802.1AE) encryption/decryption core.

IP Cores, Inc., California, USA (http://www.ipcores.com) has announced shipments of an FPGA version of the MACsec statistics add-on core for its popular MSP10 MACsec encryption/decryption core for line-speed MACsec processing targeting the 100 Gbps Ethernet solutions.

“An FPGA version of a companion to our successful MSP10 MACsec core helps our customers using FPGAs to implement secure 100G communication solutions,” said Dmitri Varsanofiev, CTO of IP Cores, Inc. “The statistics core gluelessly interfaces to our MSP10 core and is fully integrated to provide our customers with an instant addition of the statistics counters to their design per the IEEE 802.1AE standard.”

MSP10 100 Gbps Ethernet Encryption Core

MSP10 MACsec IP core delivers full 100 Gbps data rate on any frame mix, including the shortest 64-byte Ethernet frames. Variety of the core configurations permits up to tens of thousands of simultaneously active secure associations. All features of the MACsec standard are supported, including the recent extensions: IEEE 802.1AEbw (XPN, 64-bit extended packet numbering) and IEEE 801.1AEbn (GCM-AES-256 encryption).

MSP10 core has been made available for all modern FPGA families, including those manufactured by Altera and Xilinx, in addition to the original ASIC targeting.

Additional information about TRNG1 can be found on the IP Cores, Inc. Web site, http://www.ipcores.com/msp10_macsec_processor_ip_core.htm.


MACsec is the IEEE MAC Security standard (also known as 802.1AE) that defines connectionless data confidentiality and integrity for media access protocols. It is standardized by the IEEE 802.1 working group. MACsec specifies the implementation of a MAC Security Entities (SecY) and defines MACsec frame format, which is similar to the Ethernet frame, but includes additional fields (Security Tag and Message authentication code or ICV).

MACsec uses Galois/Counter Mode of Advanced Encryption Standard cipher with 128-bit key (AES-GCM-128) as a default cipher suite, with IEEE 801.1AEbn adding the 256-bit encryption for applications that require additional security.

Security tag inside each frame in addition to Ethertype includes the secure channel identifier, association number within the channel, and packet number in order to provide unique initialization vector for encryption and authentication algorithms as well as the protection against replay attacks.

About IP Cores, Inc.

IP Cores is a rapidly growing California company in the field of security, error correction, and DSP IP cores. Founded in 2004, the company provides hardware IP cores for communications and storage fields. Its portfolio includes AES-based ECB/CBC/OCB/CFB, AES-GCM and AES-XTS cores, MACsec 802.1AE, IPsec and SSL/TLS protocol processors, flow-through AES/CCM cores with header parsing for IEEE 802.11 (WiFi), 802.16e (WiMAX), 802.15.3 (MBOA), 802.15.4 (Zigbee), public-key accelerators for RSA and elliptic curve cryptography (ECC), true random number generators (TRNG), cryptographically secure pseudo-random number generators (CS PRNG), secure SHA and MD5 cryptographic hashes, lossless data compression cores, low-latency fixed and floating-point FFT and IFFT cores, as well as cyclic, Reed-Solomon, LDPC, BCH and Viterbi forward error correction (FEC) decoder cores.

All mentioned trademarks and registered trademarks are the property of their respective owners.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Dmitri Varsanofiev
IP Cores, Inc.
+1 (650) 815-7996 Ext: 708
Email >