In 20+ years of analyzing samples and advising customers I've seen more problems from oxidation than from overheating or any other single issue...
West Conshohocken, PA (PRWEB) May 13, 2015
Usually, a new product from Paratherm is a heat transfer fluid, or sometimes a liquid for cleaning out deposits of sludge and carbon that form inside the system when the fluid deteriorates.
Paratherm is introducing a new product for hot oil systems that doesn’t fit in either of those categories. The Paratherm AP (Antioxidant Protection) Additive is designed to be added to operating hot-oil systems to extend the oil’s useful life.
“Acids are the cause of the most common hot-oil system problem—sludge,” says Jim Oetinger, technical director for Paratherm. “When expansion tanks are installed and operated properly, the oil stays cool and acid formation is very slow. However some expansion tanks aren’t installed properly. Sometimes the expansion line is insulated or is less than 4-feet long. Warm-up valves are left open or sunlight hits a tank that is painted a dark color. These can cause the tank to run hot enough to form acids when the oil reacts with oxygen. And once the Acid Number reaches 0.3-0.4, carbon starts to form.”
Paratherm AP interrupts this sequence. Incorporating a sacrificial antioxidant, Paratherm AP prevents the acids from converting to sludge. Paratherm AP is not a permanent cure — sacrificial additives become depleted over time and eventually the protection stops. So antioxidants don’t eliminate the need for preventive maintenance, they just reduce or delay the need for oil change-out. Periodic testing is the only truly accurate way to tell whether the additive is still present.
“In 20+ years of analyzing samples and advising customers I've seen more problems from oxidation than from overheating or any other single issue," says Oetinger.
Before this product came on the market, the only alternative to an elevated acid number was to change out the fluid, entirely or in part. And there are circumstances where the oxidation may have already progressed too far for this additive to be practically useful.
But Paratherm recognizes that change-out isn't always convenient, or even possible, in certain processing situations. In particular, seasonal operations like asphalt production have no time for downtime when the paving push is on.
Paratherm AP Additive is available in 55-gallon drums. If there's a need, for smaller systems, 5-gallon pails may be introduced as well.
Founded in 1988, Paratherm has become a leading manufacturer of heat transfer fluids, system cleaners and other additive products. The firm offers a range of products (currently nine fluids, three cleaners, and an oxidation reinhibitor additive) covering temperatures from -148°F to +675°F. Paratherm serves a diverse number of industries including the chemical industry, food processing and plastics manufacturing.
Paratherm's efforts have long been focused on their clients’ applications, systems and operations with expert assistance and quick turnaround being top priorities. Orders can be filled quickly and in urgent situations very quickly, because the company stocks product in half-a-dozen North American locations and internationally in Europe, South America and Asia.
Since December 2012, Paratherm has been a business of CPI Fluid Engineering, a division of The Lubrizol Corporation.