B. Braun to Promote Medical Device Contract Manufacturing at 2016 Medical Design and Manufacturing West Conference

Share Article

Company to showcase components including normally closed large-bore low-pressure check valves and hands on demo station

B. Braun’s OEM Division (http://www.bbraunoem.com) will showcase its contract manufacturing services and medical device components at the 2016 Medical Design and Manufacturing West (MD&M) conference and exhibition, February 9-11, 2016, at the Anaheim Convention Center in California.

B. Braun (Booth #2401) will exhibit products and components from several categories: fluid administration and management products, admixture devices, interventional accessories, catheters and custom kits. The booth will include a hands-on valve station that will showcase the company’s portfolio of valves, including normally closed, low pressure, high pressure, in-line, dual check, aspiration, trumpet and needle-free configurations.

An established leader in design and manufacturing of both standard and custom valves, the company will showcase normally closed large-bore low-pressure check valves designed to prevent the backflow of fluids into the primary IV container during piggyback hookup or bolus injection. The normally closed valves open automatically when pressure is applied. They are designed for the intermittent injection of fluids while preventing back flow. They feature a crack pressure of 22 inches of water maximum and a back pressure of 30 PSI. A female luer lock option is also available.

The 2016 MD&M West event (http://mdmwest.mddionline.com/) will assemble thousands of medical design and manufacturing professionals. The event bills itself as the nation's largest medical device event with more than 2,000 exhibiting suppliers and a selection of over 160 educational opportunities ranging from engineering basics to executive strategy.

For more information, contact B. Braun’s OEM Division toll free at 866-8-BBRAUN or visit http://www.bbraunoem.com.

About B. Braun’s OEM Division
B. Braun’s OEM Division (http://www.bbraunoem.com) delivers complete contract manufacturing capabilities focusing on fluid administration and admixture products, kits, valves, catheters and interventional accessories. OEM takes customers’ designs from the earliest stages through design prototyping, assembly, packaging and sterilization. The OEM Division of B. Braun Medical Inc. is based in Bethlehem, Pa.

About B. Braun
B. Braun Medical Inc., a leader in infusion therapy and pain management, develops, manufactures, and markets innovative medical products and services to the healthcare industry. The company is committed to eliminating preventable treatment errors and enhancing patient, clinician and environmental safety. B. Braun Medical is part of the B. Braun Group of Companies in the U.S., which is headquartered in Bethlehem, Pa., and includes B. Braun Interventional Systems, Aesculap® and CAPS®.

Globally, the B. Braun Group of Companies employs more than 54,000 employees in more than 60 countries. Guided by its Sharing Expertise® philosophy, B. Braun continuously exchanges knowledge with customers, partners and clinicians to address the critical issues of improving care and lowering costs. To learn more about B. Braun Medical, visit http://www.BBraunUSA.com.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Michael Drabenstott
Lehigh Mining & Navigation
+1 (484) 821-0920 Ext: 704
Email >