New at Summit Racing Equipment: QuickTrick Alignment Turn Plates

Share Article

Summit Racing now carries QuickTrick Alignment Turn Plates. Made for use with QuickTrick or other wheel alignment systems, the plates are just 5/16 inch thick, so the user can drive or push the car onto them—no jack or lift needed.

Summit Racing now carries QuickTrick Alignment Turn Plates. Made for use with QuickTrick or other wheel alignment systems, the plates are just 5/16 inch thick, so the user can drive or push the car onto them—no jack or lift needed.

The QuickTrick turn plates have a scale that reads from +20 to -20 degrees in one degree increments. The plate bottoms have a rubberized coating to prevent slippage. A Teflon® coating between the plates prevents binding—turning the wheels for precise alignment is smooth and accurate. There are no pins to reset or a pointer that can get damaged.

Using the QuickTrick Alignment Turn Plates is easy:

  • Roll the front wheels onto the plates. The bottom plates do not have to be square with the wheels but the wheels should be straight
  • Use a dry erase marker or scotch tape to mark the 0 degree position from the scale on the base plates
  • Set the caster, camber, and toe with appropriate tools

The QuickTrick Alignment Turn Plates can be used with most alignment tools, but we recommend using QuickTrick’s Pro System or QuickSlide kit. They’re easy to use and accurate to within .1 degree.

Summit Racing Equipment
http://www.SummitRacing.com
1-800-230-3030

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Alan Rebescher
Summit Racing Equipment
+1 (330) 630-0270 Ext: 7406
Email >