Wisconsin Oven’s horizontal quench systems have the capacity to process loads up to 6,000 pounds with quench times as low as 7 seconds. This makes them ideal for solution treating a range of aluminum products.
EAST TROY, Wis. (PRWEB) February 14, 2018
Wisconsin Oven Corporation shipped two (2) electrically heated standard horizontal quench systems to an aluminum manufacturer. The systems are designed for the solution treatment of aluminum. Each of the horizontal quench systems are designed to heat 1,000 pounds of aluminum to a 950°F operating temperature. Once the loads are heated to the operating temperature they will soak at temperature, and then be rapidly lowered into the quench tank in less than 10 seconds from the time the door starts to open until the load is fully submerged.
The aluminum solution treating systems are each designed for a load size of 4'0" wide x 4'0" high x 4'0" long and have qualified operating temperature ranges of 775 F and 1,075 F. The customer required guaranteed temperature uniformity of ±10°F at 775 F and 1,075 F to ensure the furnace would meet AMS 2750E, Class 2 furnaces and Instrumentation Type C requirements. The systems utilize PLC process control with HMI operator interface.
“Wisconsin Oven’s horizontal quench systems have the capacity to process loads up to 6,000 pounds with quench times as low as 7 seconds. This makes them ideal for solution treating a range of aluminum products.” -Doug Christiansen, Applications Engineer
Unique features of these horizontal quench systems include:
- Guaranteed temperature uniformity of ±10°F at set points of 775 F and 1,075 F verified by a nine (9) point profile test
- Meets AMS 2750E, Class 2 furnaces and Instrumentation Type C requirements
- 12-gauge, 304 stainless steel plate quench tank shell with 15° F quench tank temperature rise design, and heat input capability to maintain 140° F tank water temperature
- Electrically-operated oven/quench pusher load/unload mechanism
- One (1) vertical lift, electrically-operated door
- Allen-Bradley CompactLogix™ PLC, 10" PanelView™ Color HMI, and programmable recipe temperature controllers with Ethernet capabilities
These horizontal quench systems were fully factory tested and adjusted prior to shipment from our facility. All safety interlocks are checked for proper operation and the equipment is operated at the normal and maximum operating temperatures. An extensive quality assurance check list was completed to ensure the equipment met all Wisconsin Oven quality standards. This equipment is backed by Wisconsin Oven’s Exclusive and Unprecedented 5-Year WOW™ warranty (parts only).
About Wisconsin Oven
Wisconsin Oven Corporation has been designing, engineering, and manufacturing industrial ovens and other heating equipment since 1973. Their custom and standard industrial ovens are used for a multitude of applications including heat treating, finishing, drying, and curing. Many of the industries they serve require specific temperature uniformity and equipment performance documentation. Their experienced design team is able to meet even the most stringent standards for their customers’ equipment. Wisconsin Oven realizes that the success of the company depends on their Championship team of employees, which is why they have developed a company culture that recognizes and rewards employees. The goal at Wisconsin Oven is to outperform competition and provide customers with outstanding products and service.
Wisconsin Oven is owned by Thermal Product Solutions (“TPS”), a leading American manufacturer of industrial ovens, furnaces, pharmaceutical sterilizers, laboratory ovens, environmental temperature chambers, and stability test chambers. TPS provides thermal processing and test solutions for a range of industries. TPS brands include Baker Furnace, Blue M, Gruenberg, Tenney, Lindberg, Lunaire, MPH, and Wisconsin Oven. For more information on equipment solutions from TPS visit the website at http://www.thermalproductsolutions.com.