Alexandria, VA (Vocus) March 11, 2010
The International Bottled Water Association (IBWA) recently commissioned a Life Cycle Inventory (LCI) study to determine the environmental footprint of the United States bottled water industry. The results indicate that bottled water has a very small environmental footprint. The study found:
Franklin Associates, a division of ERG, produced the LCI and prepared a report that quantified the energy requirements, solid waste generation, and greenhouse gas emissions for the production, packaging, transport, and end-of- life management for bottled water consumed in the United States in 2007. According to a 2008 Beverage Marketing Corporation report, total consumption of bottled water in the U.S. in 2007 was 8.8 billion gallons.
“The environmentally aware actions of many bottled water companies, such as the use of more recycled PET (rPET) in their bottle production, increasing recycling rates, and enhanced light-weighting, have positively impacted the environmental footprint of the industry,” says Tom Lauria, Vice President, IBWA Communications.
Another recent study confirms the bottled water industry’s very small environmental footprint. On March 2, 2010, Nestle Waters North America, an IBWA member, released peer-reviewed findings on its environmental footprint, in a study conducted by Quantis International.
Key findings from the study include:
Technical Highlights From the IBWA LCI Study
Energy— The IBWA LCI report looked at the BTU (British Thermal Unit) values for fuels and electricity consumed in the production of bottled water. The information is categorized according to six basic energy sources: natural gas, petroleum, coal, nuclear, hydropower, and other (solar, biomass and geothermal energy). Also included in the LCI report are the BTU values for all transportation steps and production of packaging materials, including the energy content of fossil-fuel derived packaging materials.
According to the U.S. Energy Information Administration (EIA), in 2007 the United States consumed 101,553,855 billion (102 quadrillion) BTUs of primary energy as fuels (this is approximately 335.9 million BTU per person).(1) Based on this data, the IBWA LCI report found that:
Solid Waste — The report examined solid wastes generated from the production, processing, packaging, and transportation of bottled water. The quantities of postconsumer packaging wastes (packaging that is disposed after the bottled water is consumed) were adjusted to account for current recycling levels for plastic, glass, and corrugated packaging.
Americans generated 254 million tons of municipal solid waste (MSW) in 2007, as reported by the U.S. EPA. After recovery for recycling, total MSW discards were 169.2 million tons.(3)
Greenhouse Gas Emissions—Greenhouse gas emissions (GHG) are expressed as CO2 equivalents (CO2 eq).(4)
According to the EIA, total U.S. greenhouse gas emissions in 2007 were 7,947 million tons of CO2 eq.(5) Based on this data, the IBWA LCI report found that:
(1) http://www.eia.doe.gov/emeu/aer/overview.html, Annual Energy Review, Table 1.3: Primary Energy Consumption by Source, 1949-2008.
(2) Approximately 30 percent of this energy is associated with the energy content of the plastic materials used in bottled water packaging, and the other 75 trillion BTU was consumed as fuels for process and transportation energy
(3) http://www.epa.gov/waste/nonhaz/municipal/pubs/msw07-rpt.pdf.
(4) To calculate the pounds of CO2 eq, the pounds of emissions of fossil CO2, methane, and nitrous oxide over the life cycle of small pack and HOD bottled water are multiplied by the total global warming potential of each greenhouse gas relative to carbon dioxide’s total global warming potential.
(5) ftp://ftp.eia.doe.gov/pub/oiaf/1605/cdrom/pdf/ggrpt/057308.pdf
(6) Data for orange juice based on information at http://www.tropicana.com.pdf/carbonFootprint.pdf
(7) Data for soft drinks based on information at http://cokecorporateresponsibility.co.uk/carbontrust/product-carbon-footprints.html
(8) This assumes that the two calculations methods are comparable.
Contact: TOM LAURIA
703-647-4609 office / 703-887-4056 cellphone
The International Bottled Water Association (IBWA) is the authoritative source of information about all types of bottled waters. Founded in 1958, IBWA's membership includes U.S. and international bottlers, distributors and suppliers. IBWA is committed to working with the U.S. Food and Drug Administration (FDA), which regulates bottled water as a packaged food product, and state governments to set stringent standards for safe, high quality bottled water products. In addition to FDA and state regulations, the Association requires member bottlers to adhere to the IBWA Bottled Water Code of Practice, which mandates additional standards and practices that in some cases are more stringent than federal and state regulations. A key feature of the IBWA Bottled Water Code of Practice is an annual plant inspection by an independent, third party organization. Consumers can contact IBWA at 1-800-WATER-11 or log onto IBWA's web site (http://www.bottledwater.org) for more information about bottled water and a list of members' brands. Media inquiries can be directed to VP of Communications Tom Lauria at 703-647-4609.
# # #