FDAnews Announces — Mathematics of Sterilization Webinar, May 21, 2015

Share Article

Jerry Dalfors, the man the FDA asked to teach their own field inspectors about sterilization, will discuss the definition of “sterile” and how to get there. He will describe different sterilization methods, various approaches to be used for the validation of a sterilization process and what is required for routine monitoring and control of sterilization.

Mathematics of Sterilization
**FDAnews Webinar**
May 21, 2015 — 1:30 p.m. – 3:00 p.m. EDT
http:// http://www.fdanews.com/MathematicsOfSterilization

The FDA has been vocal about its commitment to stemming the outbreak of sterilization concerns, both on the drug and devices sides. Headquarters and field personnel are cracking down — in the past six months seven compounders across the U.S. received warning letters about sterilization.

Jerry Dalfors, the man the FDA asked to teach their own field inspectors about this topic, will discuss the definition of “sterile” and how to get there.

He’ll describe different sterilization methods, various approaches to be used for the validation of a sterilization process (using moist heat as template that can be applied to other methods) and what is required for routine monitoring and control of sterilization.

Plus, he will review the causes for FDA warning letters for inappropriate sterilization development, validation and on-going assessment of the process.

This webinar will cover lethality, the different elements that affect D-value and Z-value, and how to calculate the probability and determine that there is essentially zero risk in products due to a lack of sterility.

During this 90 minute presentation attendees will learn to demonstrate consistent validation to achieve a significant cost reduction with minimal patient risk, specifically:

  •     How to use survivor curves, to determine D-values and Z-values
  •     How linear regression can be used to calculate the edge of failure
  •     How to use fraction-negative studies when multiple products or sites must be evaluated
  •     Correction factors associated with heating and cooling
  •     Cold spot determination
  •     Calculation of process lethality
  •     Which biological indicators to use, and how to make the selection
  •     What laboratory studies are best for supporting sterilizer studies
  •     The identification of elements in the process that can affect D-value

Background:

Different microorganisms in different environments during sterilization have different resistance to the destructive principles that cause the organism or spore to die. Some organisms have their optimal growth temperature at 110°C, whereas most vegetative cells are killed at 60°C. Some species are highly radiation resistant. The chemical environment causes significant variance in the death rate of a microorganism. Very dense cell walls, spore coats, or slime layers outside the cell can severely limit the effect of what is being used to sterilize the product.

Heat sterilization is a probability function dependent on heat exposure, the number of microorganisms, and the heat resistance of the microorganisms.

Current regulations expect the sterilization process to provide a level of assurance of at least 1x10-6 probability (fewer than one non-sterile unit per million units) of survival (non-sterility) for terminally sterilized parenteral drugs and medical devices. Since regulations require that you generate in your sterilization processes a probability of a non-sterile unit (PNSU), how do you use D-values, Z-values and F0 to calculate the probability and determine that you have essentially zero risk in your products due to a lack of sterility?

Meet the Presenter:
Jerry Dalfors, Principal JD Technologies.
Jerry Dalfors has 40-plus years of business administration, consultative, technical and managerial experience in the development and manufacture of highly regulated biopharmaceutical products including injectables, biologics, medical devices and oral dosages. He has held permanent employee, temporary employee and company representative management positions with a multitude of the major pharmaceutical and biotechnology companies in the US. Jerry is considered an expert in almost all aspects of the biopharmaceutical and medical device industry, and has trained many FDA field inspectors. None of his work has ever received a 483, but he has corrected and prevented many, along with warning letter remediation.

Who Will Benefit:

  •     Manufacturing Operations
  •     Technical Operations and Validation Professionals
  •     Formulation
  •     Engineering
  •     QA/QC
  •     Product and Process Development
  •     Regulatory Affairs
  •     Research and Development
  •     Sterility Assurance

Conference Details:
Mathematics of Sterilization
**FDAnews Webinar**
May 21, 2015 — 1:30 p.m. – 3:00 p.m. EDT
http:// http://www.fdanews.com/MathematicsOfSterilization

Tuition:
$287 per site

Easy Ways to Register:
Online:     http:// http://www.fdanews.com/MathematicsOfSterilization
By phone: 888-838-5578 or 703-538-7600

About FDAnews:
FDAnews is the premier provider of domestic and international regulatory, legislative, and business news and information for executives in industries regulated by the US FDA and the European Medicines Agency. Pharmaceutical and medical device professionals rely on FDAnews' print and electronic newsletters, books and conferences to stay in compliance with international standards and the FDA's complex and ever-changing regulations.

Share article on socal media or email:

View article via:

Pdf Print

Contact Author

Michelle Butler
FDANEWS
+1 (703) 538-7665
Email >
FDAnews
Like >