GL’s OC-3 STM-1 and OC-12 STM-4 analyzer is referred to as LightSpeed1000™ analyzer supports ATM interfaces on both ports and can be configured for either OC-3 or OC-12 rate.
Gaithersburg, Maryland (PRWEB) April 05, 2012
GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of its product OC-3 STM-1 and OC-12 STM-4 Analyzer software for ATM mode.
Speaking to media persons, Mr. Vijay Kulkarni CEO of the company said, "Asynchronous Transfer Mode (ATM) is a flexible network protocol carrying voice, video, and data in fixed length cells. ATM network has two kinds of interfaces, UNI (Interface between ATM User and Public ATM switch) and NNI (Interface between two Public ATM switches). Similar to the OSI Protocol model, ATM has an ATM Layer as Layer 2, ATM Adaptation Layer (AAL) as Layer 3 and other higher layers depending on C-Plane, U-Plane or Layer Management Plane.”
He added, "GL’s OC-3 STM-1 and OC-12 STM-4 analyzer is referred to as LightSpeed1000™ analyzer supports ATM interfaces on both ports and can be configured for either OC-3 or OC-12 rate. Multiple cards can be installed in a PC making it scalable to monitor or generate OC-3 or OC-12 traffic on multiple boards. Each port on a card can work independent of others, which extends analyzer’s flexibility as test equipment. And it complies with ITU-T ATM standards.”
·Supports signal rates of 155.52 Mbps for OC-3 and 622.08 Mbps for OC-12 interface
·Emulation and analysis modes are supported on UNI or NNI per port
·Wire speed cell generation and processing on single or multiple ports using internal logic
·Capture to file on individual ports, limited only by hard disk size
·Simultaneous synchronous capture or transmit is possible on both optical ports
·Comprehensive transmit/receive testing capabilities; transmitting and verifying with incrementing sequence numbers with each packet/cell
·ATM Tx/Rx application – Supports ATM traffic generation and cell analysis
·Ability to configure ATM headers (GFC, VPI, VCI, PT, and CLP fields), and bandwidth during traffic generation
·Rx cell analysis reports resync count errors and sequence errors
·Multistage loopback – Supports Rx-to-Tx memory loopback, line loopback, diagnostic loopback and PL3 loopback options
·Ability to capture real-time traffic and playback the traffic for simulation
·Complex and flexible hardware based filtering includes sixteen 128 bit independent filters with bit masks, for both ports with AND/OR include/exclude conditions
·ATM and UMTS protocol analysis supported on single or multiple ports
·Supports both AAL2 and AAL5 decoding
·Bit Error Rate Test module supports generation and analysis of payloads at wire speed. Supports ATM header configuration, PRBS patterns and user-defined patterns as payload. Report on error count, error rate, sync loss, SES, and others is provided
·Received cells hardware time stamping to the accuracy of 10ns
·SONET level statistics for both Tx and Rx cells. Additional statistics for errors, alarms, and BERT test cells
·Monitor and configure section, line, and path overhead bytes
About GL Communications Inc.,
Founded in 1986, GL Communications Inc. is a leading supplier of test, monitoring, and analysis equipment for TDM, Wireless, IP and VoIP networks. Unlike conventional test equipment, GL's test platforms provide visualization, capture, storage, and convenient features like portability, remotability, and scripting.
GL’s TDM Analysis & Emulation line of products includes T1, E1, T3, E3, OC-3, OC-12, STM-1, STM-4, analog four-wire, and analog two-wire interface cards, external portable pods, and complete system solutions. Capabilities include voiceband traffic analysis and emulation across all traffic types (voice, digits, tones, fax, modem), all protocols (ISDN, SS7, GR-303, Frame Relay, HDLC, V5.X, ATM, GSM, GPRS, LTE, etc.), and with capacities up to thousands of channels. Our newest products provide astonishing capacity and capture capability up to and including gigabit speeds.
GL’s VoIP and IP products generate / analyze thousands of calls and traffic simultaneously with traffic types such as frames, packets, voice files, digits, video, tones, noise, and fax. Almost all codecs are supported including G.711, G.729, AMR, EVRC-A,B,C, GSM, iSAC, and many more. Additional features include visual analysis, real-time listening, and recording. The product line also includes Ethernet / IP Testing capability that simulates and checks frame transport and throughput parameters of Ethernet and IP networks, including delay, errors and other impairments.
GL's Voice Quality Testing (VQT) product line complements all of GL's products. Using ITU-standard algorithms (PAMS, PSQM, and PESQ), GL's VQT provides a widely accepted solution for assessing voice quality in the telecom industry. Voice Quality Testing across multiple networks (T1, E1, T3, E3, OC-3, OC-12, VoIP, Wireless, and Landline) is available.
GL’s Wireless Products perform protocol analysis and voice quality assessment on GSM, CDMA, UMTS, and LTE networks. Connections can be made to any wireless phone with automated call control, GPS mapping and real-time signal measurements.
GL’s Echo Canceller testing solutions provide the broadest range of simulation and analysis, including line and acoustic echo. GL’s compliance testing per G.168. G.167 and P.340 across TDM, IP, VoIP and Wireless networks is widely accepted in the industry.
GL’s wireless VQT solutions help assessing impairments to voice quality such as poor mobile phone quality, voice compression and decompression algorithms, delay, loss and gain in speech levels, noise, acoustic and landline echo, and other distortions are easily assessed and accurately measured.
GL’s Handheld data testers can test a wide variety of communications facilities and equipment including T1, fractional T1, E1, fractional E1, T3 and E3 modems, multiplexers, CSU, DSUs, T1 CSUs, DTUs, NTUs and TIUs and more. The testers provide convenience, economy, and portability for almost any interface, including RS232, RS-422, RS-530, X.21, T1, E1, T3, E3, and many others.
GL’s Network Surveillance and Monitoring products include Probes for TDM, IP, VoIP, ATM, and Wireless networks. An open standards based approach provides a scalable, feature rich, real-time access to network characteristics. Centralized or distributed access, efficient transport and database loading allow compatibility with 3rd party and standards based monitoring systems.