LinkTest™ SINGLE+ is a sophisticated bit error rate tester in a compact, hand held package.
Gaithersburg, Maryland, (PRWEB) October 29, 2011
GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of LinkTest™ SINGLE+ – a portable Handheld Bit Error Rate Tester.
Addressing a press conference, Mr. Vijay Kulkarni CEO of the company said, “The GL’s LinkTest™ SINGLE+ is a sophisticated bit error rate tester in a compact, hand held package. The unit can test a wide variety of communications facilities and equipment including DDS, T1, fractional T1, E1, fractional E1, T3and E3NTUs, multiplexers, CSU/DSUs, T1 CSUs, DTUs and TIUs.”
He Added, “The unit is designed to fulfill the requirements of a broad range of applications that may be used to test data communications equipment, networks, systems and line facilities. It simulates real data passing through a data communications link, and then determines the performance of a piece of equipment or that of a network. Many standard data patterns may be generated and recovered.”
Mr. Kulkarni further added, “It can monitor the data passing through the data communications link, and indicate line quality by comparing the data with the received data that was known to have been transmitted.”
Some of the Important Features
·Tests asynchronous, synchronous, DDS, T1 and fractional T1, E1 and fractional E1, T3 E3 facilities and equipment
·Interfaces V.35, RS232, RS422/RS530, X.21, HSSI, DDS, T1 E1, T3 E3
·Data rates from 50 bps to 50 Mbps
·Displays G.821 performance measurements
·Built-in speaker for monitoring DS0s or timeslots
·Controlled from the Front panel, Windows GUI or Command Line Interface
·Works with AC or battery power
·Final test departments
·Field installations of data communications equipment,
·Field evaluations of data communications equipment,
·Field monitoring of data communications facilities
·Field problem isolation
About GL Communications Inc.,
Founded in 1986, GL Communications Inc. is a leading supplier of test, monitoring, and analysis equipment for TDM, Wireless, IP and VoIP networks. Unlike conventional test equipment, GL's test platforms provide visualization, capture, storage, and convenient features like portability, remotability, and scripting.
GL’s TDM Analysis & Emulation line of products includes T1, E1, T3, E3, OC-3, OC-12, STM-1, STM-4, analog four-wire, and analog two-wire interface cards, external portable pods, and complete system solutions. Capabilities include voiceband traffic analysis and emulation across all traffic types (voice, digits, tones, fax, modem), all protocols (ISDN, SS7, GR-303, Frame Relay, HDLC, V5.X, ATM, GSM, GPRS, LTE, etc.), and with capacities up to thousands of channels. Our newest products provide astonishing capacity and capture capability up to and including gigabit speeds.
GL’s VoIP and IP products generate / analyze thousands of calls and traffic simultaneously with traffic types such as frames, packets, voice files, digits, video, tones, noise, and fax. Almost all codecs are supported including G.711, G.729, AMR, EVRC-A,B,C, GSM, iSAC, and many more. Additional features include visual analysis, real-time listening, and recording. The product line also includes Ethernet / IP Testing capability that simulates and checks frame transport and throughput parameters of Ethernet and IP networks, including delay, errors and other impairments.
GL's Voice Quality Testing (VQT) product line complements all of GL's products. Using ITU-standard algorithms (PAMS, PSQM, and PESQ), GL's VQT provides a widely accepted solution for assessing voice quality in the telecom industry. Voice Quality Testing across multiple networks (T1, E1, T3, E3, OC-3, OC-12, VoIP, Wireless, and Landline) are all available.
GL’s Wireless Products perform protocol analysis and voice quality assessment on GSM, CDMA, UMTS, and LTE networks. Connections can be made to any wireless phone with automated call control, GPS mapping and real-time signal measurements.
GL’s Echo Canceller testing solutions provide the broadest range of simulation and analysis, including line and acoustic echo. GL’s compliance testing per G.168. G.167 and P.340 across TDM, IP, VoIP and Wireless networks is widely accepted in the industry.
GL’s wireless VQT solutions help assessing impairments to voice quality such as poor mobile phone quality, voice compression and decompression algorithms, delay, loss and gain in speech levels, noise, acoustic and landline echo, and other distortions are easily assessed and accurately measured.
GL’s Handheld data testers can test a wide variety of communications facilities and equipment including T1, fractional T1, E1, fractional E1, T3 and E3 modems, multiplexers, CSU, DSUs, T1 CSUs, DTUs, NTUs and TIUs and more. The testers provide convenience, economy, and portability for almost any interface, including RS232, RS-422, RS-530, X.21, T1, E1, T3, E3, and many others.
GL’s Network Surveillance and Monitoring products include Probes for TDM, IP, VoIP, ATM, and Wireless networks. An open standards based approach provides a scalable, feature rich, real-time access to network characteristics. Centralized or distributed access, efficient transport and database loading allow compatibility with 3rd party and standards based monitoring systems.