T3 (DS3) E3 T1 E1 Ethernet Analyzer Pod

Share Article

GL Communications Inc conveyed today the availability of T3 (DS3) E3 T1 E1 Ethernet Analyzer Pod – capable of capturing two full T3 (DS3) / E3 data streams, dropping and inserting T1 or E1, full Ethernet analysis, and HDLC, ATM, FR, and PPP Analysis

T3 (DS3) E3 T1 E1 Ethernet Analyzer

T3 (DS3) E3 T1 E1 Ethernet Analyzer Pod – capable of capturing two full T3 (DS3) / E3 data streams, dropping and inserting T1 or E1, full Ethernet analysis, and HDLC, ATM, FR, and PPP Analysis

GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of T3 (DS3) E3 T1 E1 Ethernet Analyzer Pod – capable of capturing two full T3 (DS3) / E3 data streams, dropping and inserting T1 or E1, full Ethernet analysis, and HDLC, ATM, FR, and PPP Analysis.

Addressing a press conference, Mr. Vijay Kulkarni CEO of the company said, “GL's T3 (DS3) E3 T1 E1 Ethernet Analyzer Pod is one of the smallest and lightest (weighing only 1.75 lbs) analyzer units in the world. The small footprint makes it ideal for use in the lab as well as in the field. The unit's lightweight makes it easy to carry in the pouch of a Notebook PC making it perfect for air travel. Compatibility with any Desktop or Notebook PC allows the software to be installed on many PCs - just ship the unit to the intended location and use it on an available PC.”

He Added, “GL’s T3/E3 analyzer unit offers a complete solution for T3/E3 (44.736/34.368 Mbps), T1/E1 (1.544 Mbps / 2.048Mbps) and Ethernet testing. It is fully compatible with GL’s other test systems. It can be used in conjunction with GL’s Laptop T1/E1 analyzer for individual T1, E1, DS0, and analog analysis.”

Some of the Important Features

·Multiple interfaces for analysis (T3 (DS3) /E3, T1/E1 and Ethernet) and control (USB and Ethernet) to support a wide array of testing scenarios
·Plug and play through USB 2.0 control interface
·Software selectable T3 (DS3) / E3 interface along with T1 (DS1) and E1 Drop and Insert
·Dual T3/E3 Receivers and Transmitters for non-intrusive and intrusive testing of both eastbound and westbound signals at the same time
·Comprehensive T3, E3, T1, E1 and Ethernet testing solution
·General T3 (DS3) /E3 signal testing capabilities
·Channelized (Structured) Testing
·Unchannelized (Unstructured) Testing
·Simultaneously record / playback the entire T3 (DS3) /E3 in framed or unframed modes up to hard disk capacity
·Flexible clocking - internal, recovered (from T3 (DS3) /E3, T1 (DS1) or E1) and external
·Scripting and Automation through GL’s well-known Windows Client Server (WCS) approach
·Monitor / Manage the Analyzer remotely via Ethernet port (future enhancement)

About GL Communications Inc.,

Founded in 1986, GL Communications Inc. is a leading supplier of test, monitoring, and analysis equipment for TDM, Wireless, IP and VoIP networks. Unlike conventional test equipment, GL's test platforms provide visualization, capture, storage, and convenient features like portability, remotability, and scripting.

GL’s TDM Analysis & Emulation line of products includes T1, E1, T3, E3, OC-3, OC-12, STM-1, STM-4, analog four-wire, and analog two-wire interface cards, external portable pods, and complete system solutions. Capabilities include voiceband traffic analysis and emulation across all traffic types (voice, digits, tones, fax, modem), all protocols (ISDN, SS7, GR-303, Frame Relay, HDLC, V5.X, ATM, GSM, GPRS, LTE, etc.), and with capacities up to thousands of channels. Our newest products provide astonishing capacity and capture capability up to and including gigabit speeds.

GL’s VoIP and IP products generate / analyze thousands of calls and traffic simultaneously with traffic types such as frames, packets, voice files, digits, video, tones, noise, and fax. Almost all codecs are supported including G.711, G.729, AMR, EVRC-A,B,C, GSM, iSAC, and many more. Additional features include visual analysis, real-time listening, and recording. The product line also includes Ethernet / IP Testing capability that simulates and checks frame transport and throughput parameters of Ethernet and IP networks, including delay, errors and other impairments.

GL's Voice Quality Testing (VQT) product line complements all of GL's products. Using ITU-standard algorithms (PAMS, PSQM, and PESQ), GL's VQT provides a widely accepted solution for assessing voice quality in the telecom industry. Voice Quality Testing across multiple networks (T1, E1, T3, E3, OC-3, OC-12, VoIP, Wireless, and Landline) are all available.

GL’s Wireless Products perform protocol analysis and voice quality assessment on GSM, CDMA, UMTS, and LTE networks. Connections can be made to any wireless phone with automated call control, GPS mapping and real-time signal measurements.
GL’s Echo Canceller testing solutions provide the broadest range of simulation and analysis, including line and acoustic echo. GL’s compliance testing per G.168. G.167 and P.340 across TDM, IP, VoIP and Wireless networks is widely accepted in the industry.

GL’s wireless VQT solutions help assessing impairments to voice quality such as poor mobile phone quality, voice compression and decompression algorithms, delay, loss and gain in speech levels, noise, acoustic and landline echo, and other distortions are easily assessed and accurately measured.

GL’s Handheld data testers can test a wide variety of communications facilities and equipment including T1, fractional T1, E1, fractional E1, T3 and E3 modems, multiplexers, CSU, DSUs, T1 CSUs, DTUs, NTUs and TIUs and more. The testers provide convenience, economy, and portability for almost any interface, including RS232, RS-422, RS-530, X.21, T1, E1, T3, E3, and many others.

GL’s Network Surveillance and Monitoring products include Probes for TDM, IP, VoIP, ATM, and Wireless networks. An open standards based approach provides a scalable, feature rich, real-time access to network characteristics. Centralized or distributed access, efficient transport and database loading allow compatibility with 3rd party and standards based monitoring systems.

###

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Mr.Shelley Sharma

Gururaj S D