GL conveys the availability of its UMTS Protocol Analyzer for OC-3 STM-1 and OC-12 STM-4

Share Article

GL Communications Inc. conveyed today the availability of its product UMTS Protocol Analyzer for OC-3 STM-1 and OC-12 STM-4.

UMTS Protocol Analyzer for OC-3 OC-12 STM-1 STM-4

GL’s OC-3 OC-12 and STM-1 STM-4 UMTS analyzer is capable of capturing, decoding, and performing various test measurements across various interfaces i.e. Iub, Iur, IuCS and IuPS interfaces of the UMTS network based ATM transport layer.

Gaithersburg, Maryland, USA -April 13, 2012- GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of its product UMTS Protocol Analyzer for OC-3 STM-1 and OC-12 STM-4.

Speaking to media persons, Mr. Vijay Kulkarni CEO of the company said, ” UMTS (Universal Mobile Telecommunications System) being an access network in the mobile communication area provides a common interface to both GSM and GPRS core network. UMTS is capable of handling both Circuit-Switched (CS) as well as Packet-Switched (PS) data simultaneously through its UTRAN network.”

He added, ” GL’s OC-3 OC-12 and STM-1 STM-4 UMTS analyzer is capable of capturing, decoding, and performing various test measurements across various interfaces i.e. Iub, Iur, IuCS and IuPS interfaces of the UMTS network based ATM transport layer. It helps in fault diagnosis and troubleshooting of UMTS network. Multiple instances of UMTS Analyzer can run simultaneously capturing data (real time and off-line) on multiple OC-3 or OC-12 interfaces.”

Important Features

·Supports real-time as well as offline analysis.
·Performs numerous measurements across Iub, Iur, IuCS and IuPS interfaces.
·Search and filtering capabilities for both real-time as well as offline analysis.
·Decodes different control plane protocols i.e. NBAP, RNSAP, RANAP, ALCAP, SSCOP etc and user plane protocols i.e. Iu-UP, Iu-FP, AMR etc.
·Decode NAS protocols (i.e. CC/MM/SM/SMS/GMM) along with the UTRAN specific protocols.
·User can configure VPI/VCI values for PVCs carrying NBAP, RNSAP, RANAP and ALCAP messages to enable decoding of the said protocols.
·Captures, decodes, filters, and reassembles AAL-2 and AAL-5 frames from within the ATM cells according to user-defined VPI/VCI.
·Ability to configure .ini file for VPI & VCI (for ALCAP, NBAP, RANAP, and so on).
·CRC verification for AAL5 carrying packet data.
·Call Trace capability over IuCS and IuPS interfaces.
·Displays Summary, detail, hex-dump, statistics, and call trace views.
·Capability to export summary view details to comma separated values (CSV) format for subsequent import into a database or spreadsheet.
·Capability to export detail decode information to an ASCII

About GL Communications Inc.,

Founded in 1986, GL Communications Inc. is a leading supplier of test, monitoring, and analysis equipment for TDM, Wireless, IP and VoIP networks. Unlike conventional test equipment, GL's test platforms provide visualization, capture, storage, and convenient features like portability, remotability, and scripting.

GL’s TDM Analysis & Emulation line of products includes T1, E1, T3, E3, OC-3, OC-12, STM-1, STM-4, analog four-wire, and analog two-wire interface cards, external portable pods, and complete system solutions. Capabilities include voiceband traffic analysis and emulation across all traffic types (voice, digits, tones, fax, modem), all protocols (ISDN, SS7, GR-303, Frame Relay, HDLC, V5.X, ATM, GSM, GPRS, LTE, etc.), and with capacities up to thousands of channels. Our newest products provide astonishing capacity and capture capability up to and including gigabit speeds.

GL’s VoIP and IP products generate / analyze thousands of calls and traffic simultaneously with traffic types such as frames, packets, voice files, digits, video, tones, noise, and fax. Almost all codecs are supported including G.711, G.729, AMR, EVRC-A,B,C, GSM, iSAC, and many more. Additional features include visual analysis, real-time listening, and recording. The product line also includes Ethernet / IP Testing capability that simulates and checks frame transport and throughput parameters of Ethernet and IP networks, including delay, errors and other impairments.

GL's Voice Quality Testing (VQT) product line complements all of GL's products. Using ITU-standard algorithms (PAMS, PSQM, and PESQ), GL's VQT provides a widely accepted solution for assessing voice quality in the telecom industry. Voice Quality Testing across multiple networks (T1, E1, T3, E3, OC-3, OC-12, VoIP, Wireless, and Landline) is available.

GL’s Wireless Products perform protocol analysis and voice quality assessment on GSM, CDMA, UMTS, and LTE networks. Connections can be made to any wireless phone with automated call control, GPS mapping and real-time signal measurements.

GL’s Echo Canceller testing solutions provide the broadest range of simulation and analysis, including line and acoustic echo. GL’s compliance testing per G.168. G.167 and P.340 across TDM, IP, VoIP and Wireless networks is widely accepted in the industry.

GL’s wireless VQT solutions help assessing impairments to voice quality such as poor mobile phone quality, voice compression and decompression algorithms, delay, loss and gain in speech levels, noise, acoustic and landline echo, and other distortions are easily assessed and accurately measured.

GL’s Handheld data testers can test a wide variety of communications facilities and equipment including T1, fractional T1, E1, fractional E1, T3 and E3 modems, multiplexers, CSU, DSUs, T1 CSUs, DTUs, NTUs and TIUs and more. The testers provide convenience, economy, and portability for almost any interface, including RS232, RS-422, RS-530, X.21, T1, E1, T3, E3, and many others.

GL’s Network Surveillance and Monitoring products include Probes for TDM, IP, VoIP, ATM, and Wireless networks. An open standards based approach provides a scalable, feature rich, real-time access to network characteristics. Centralized or distributed access, efficient transport and database loading allow compatibility with 3rd party and standards based monitoring systems.

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Mr.Shelley Sharma

Gururaj S D