Extech Dissolved Oxygen Meters Used by EPA in Oil Spill Monitoring

Extech Instruments announced today that Extech dissolved oxygen meters are being employed by the United States Environmental Protection Agency in the Gulf of Mexico oil spill. The EPA is using the Extech meters to monitor the effectiveness of oil dispersants being used underwater to manage the oil that is continuing to leak from the damaged Deepwater Horizon wellhead located on the seafloor of the Gulf of Mexico seafloor.

  • Share on TwitterShare on FacebookShare on Google+Share on LinkedInEmail a friend

Extech Dissolved Oxygen Meters Used to Monitor Gulf of Mexico

In order to conduct a more thorough analysis, more sensitive equipment was then employed, called an Extech Probe. The subsequent dissolved oxygen readings from the Extech Probe indicate that dissolved oxygen levels are within the normal range.

Waltham, MA (Vocus) May 25, 2010

Extech Instruments, makers of the world’s best test and measurement tools, announced today that Extech dissolved oxygen meters are being employed by the United States Environmental Protection Agency in the Gulf of Mexico oil spill. The EPA is using the Extech meters to monitor the effectiveness of oil dispersants being used underwater to manage the oil that is continuing to leak from the damaged Deepwater Horizon wellhead located on the seafloor of the Gulf of Mexico seafloor.

According to the EPA website, “When this crisis occurred, Coast Guard and EPA granted BP (British Petroleum) authorization to use an approved dispersant on oil present on the surface of the water in an effort mitigate the impact of the spill.” Then, the EPA and the U.S. Coast Guard authorized BP to use dispersants underwater, at the source of the Deepwater Horizon leak. Preliminary testing results indicate that subsurface use of the dispersant is effective at reducing the amount of oil from reaching the surface – and can do so with the use of less dispersant than is needed when the oil does reach the surface.

Concerned about the potential adverse effects of dispersant use below the surface, the EPA enacted an aggressive dispersant monitoring plan to be implemented by BP and that findings are routinely and carefully analyzed to ensure toxicity data is collected that may indicate any significant effects on aquatic life in the region. The good news so far is that the decreased size of the oil droplets is a good indication that, so far, the dispersant is effective.

An important parameter of these subsurface water quality studies is the monitoring of dissolved oxygen levels. Dissolved oxygen (DO) analysis measures the amount of gaseous oxygen (O2) dissolved in the water. Adequate dissolved oxygen is necessary for good water quality that is conducive to marine life. Normal ranges for DO in the Gulf area are 4 milligrams per liter (mg/l). The lower the concentration of dissolved oxygen, the greater the stress is on aquatic life. The evaluation criteria to determine further use of subsea dispersant include DO levels that are less than 2mg/l and the results of toxicity tests.

Initially, dissolved oxygen levels appeared low when first measured with one device. Needing to corroborate these findings, the EPA used an Extech dissolved oxygen meter for increased accuracy. According to the EPA, “In order to conduct a more thorough analysis, more sensitive equipment was then employed, called an Extech Probe. The subsequent dissolved oxygen readings from the Extech Probe indicate that dissolved oxygen levels are within the normal range.” So far, using the Extech dissolved oxygen meter, DO measurements continue to remain in the normal range. Read the EPA’s coverage for additional details.

Findings related to dissolved oxygen, water conductivity and temperature, oil droplet size, and other physical characteristics will serve as indicators of the effectiveness of BP’s efforts to manage the oil spill using subsurface dispersants. If any negative impacts on the environment or public health are identified, the EPA can use that data to direct BP to discontinue the use of this dispersant method.

Extech Environmental / Water Quality Testing Meters
Extech Instruments offers a range of handheld, easy to use meters for the measurement of a variety of metrics related to water quality. In addition to Dissolved Oxygen Meters like the ones used by the Environmental Protection Agency, Extech also provides over 25 accurate, affordable, and durable meters and test kits that measure chlorine, conductivity, fluoride, ORP (oxidation reduction potential), pH, salinity, and TDS (total dissolved solids). Visit our website to view the Extech range of environmental water quality testers and meters used by government environmental agencies, labs, R&D, waste water treatment plants, agriculture, and other industries.

Extech environmental meters are available worldwide at popular distributors. To check availability and find out which distributors have particular meters in stock, visit our website and click the convenient “Reporting Distributor Stock Status” button on a product’s page to check real-time availability. To shop with online-enabled distributors, use Google’s Product Search.

About Extech Instruments, a FLIR Company
Headquartered in Waltham, Massachusetts, USA, Extech Instruments is one of the largest suppliers of test and measurement equipment worldwide. Founded in 1971, Extech is known for its depth and breadth of products and its innovation in providing instruments with unique combinations of features that make them highly useful and very convenient. All Extech meters are distributed worldwide through leading representatives, distributors and OEMs. The company is ISO 9001 2000 certified and is a wholly owned subsidiary of FLIR Systems, Inc.

Product Images: Web-resolution images are available on product pages at http://www.extech.com/instruments. Contact André Rebelo for high-resolution product images.

Contact:
André Rebelo
Global PR Manager
Extech Instruments
781-434-3901
andre (dot) rebelo (at) extech (dot) com

###