Hot And Mighty™ WR2 Wash Water Recovery And Recycling System Offers 95% or Greater Reclamation Rate

Share Article

Hot And Mighty™ announces its new WR2 Wash Water Recovery And Recycling System for the mobile pressure washer industry. This system will recover and recycle residential, commercial and industrial wash water on the go. Meet and exceed your local wash water regulations and national EPA protocal with a Hot And Mighty™ WR2 Wash Water Recovery And Recycling System.

Dual Surface Cleaners With Recovery

Hot And Mighty™ announces its new WR2 Wash Water Recovery And Recycling System for the mobile pressure washer industry. This system will recover and recycle residential, commercial and industrial wash water on the go. Meet and exceed your local wash water regulations and national EPA protocol with a Hot And Mighty™ WR2 Wash Water Recovery And Recycling System.

The Hot And Mighty™ WR2 was specifically designed with the mobile pressure washing professional in mind. This skid mount unit can be mounted on a trailer or installed in the back of a box truck for water recovery and recycling at the job site. At the heart of the WR2 System is an impressive 450 CFM vacuum running at 80% capacity. It is designed to simultaneously recover from two adjustable height recovery surface cleaners or recovery accessories claiming a commanding 95% or greater water reclamation rate.

The reclaimed water then begins the automatic water recycling process by filtering through a 2-step debris interceptor. This begins sorting out large debris, dirt and sand from the water. The interceptor drums feature auto pump out and auto shut down capacities which means the wash water continuously moves through the systems with no head-aches. The system then moves the water through an all aluminum Hot And Mighty™ Oil Harvester, which removes oils and suspended solids from the wash water. The water is then polished through a series of filters that clean the recovered wash water to 20 microns. The filtered water can then be reused in your pressure washer or transferred to an on-site sanitary sewer.

The WR2 System is fully customizable and can be connected to any existing pressure washer set-up or new Hot And Mighty™ Mobile Cleaning System. Hot And Mighty™ will further design their system to to meet specific regulations and job specifications. All WR2 units can be skid mounted for easy installation on your vehicle or trailer. The WR2 was created utilizing heavy-duty industrial components to meet the rigid demands of everyday pressure cleaning professionals.

Meet and exceed EPA regulations with ease. This system was designed for easy operational use and maintenance. All filters and recycling media are cleanable thus there is no need to replace filters or media after each use. This system has been designed down to the finest detail. Do not let local and federal environmental regulations stop you from bidding work.

For additional information on Hot And Mighty™ Mobile Cleaning Systems, contact Tom Durbin or visit http://www.hotandmighty.com. Leasing, budgetary quotations and other information are available upon request. Please visit their award winning website http://www.hotandmighty.com or our get up-to-date information at the Hot And Mighty™ Custom Shop Blog http://custom.hotandmighty.com

ABOUT Hot And Mighty™ - Hot And Mighty™ Mobile Cleaning Systems provides residential, commercial and industrial cleaning and contracting solutions to various partners worldwide. Hot And Mighty™ is division of T. George Podell And Company Inc., suppliers of quality and innovative custom cleaning equipment for over 30 years. Hot And Mighty™ stocks a full line of gas and diesel powered water blasters running 2,000 to 10,000 PSI. Specializing in enclosed mobile cleaning and recycling equipment they have options to fit your specific needs.

# # #

Share article on social media or email:

View article via:

Pdf Print