Molded Plastics: A Global Strategic Business Report
San Jose, California (PRWEB) May 07, 2012
Follow us on LinkedIn – Molded plastics represent one of the most ubiquitous raw materials used in a wide gamut of industries ranging from construction, automotives, packaging, electrical & electronics, appliances to medical products. World plastic consumption plummeted to hurting levels during the recession years 2008 through 2010 as a result of unprecedented weakness in most key end-use application markets, which were hit with a general decline in plastic based products. Demand in the post recession period will be driven by resurgence in fundamental growth drivers, such as, recovery in GDP growth, employment rates, incomes levels, discretionary incomes, rise in consumer/business confidence, rebound in manufacturing activity and restoration of health to most end-use markets. Replenishing of depleting inventories in the supply chain as a result of resurging production activities on wings of improving end-user demand will additionally help perk up demand for molded plastics. Growth in the long term will stem from developing Africa/Middle East and Asian countries, particularly in China, South Korea, and Taiwan. Growth in these markets will be driven by rapid industrialization, burgeoning consumer economy, improvements in the standard of living, and strong construction, food and beverage, and consumer packaging sectors.
The global Molded Plastics market is on the threshold of an important dynamic change. Asia is rapidly emerging as the new center of balance in the global market, given the strong levels of industrialization in the region’s major economies like China and India. North America, Japan and Western Europe, the traditional power players are gradually losing steam and plastics producers from these regions are ceding market share to players from Asia-Pacific and the Middle East. The developed countries/region, which have been exporters to the world market are likely to turn net importers in the next few years as older plants are likely to be shut down due to inefficiencies, while most of the new additions are being made in Asia and the Middle East.
Emerging markets in the molded plastics space are concentrating on the expansion of their production capabilities in order to target the export market. The rapid expansion of capacity, particularly in the Asia-Pacific Rim, is causing anxiety among the domestic markets of Western Europe, the US, and Japan by restricting export opportunities. Asia has successfully emanated as a powerful exporter of fabricated plastic products. A large proportion of this production comes from Hong Kong, Japan, Korea and Taiwan, but many manufacturers have relocated themselves to low cost countries such as China, Malaysia, and Thailand. Of late, the move is to manufacture many of these products in even lower cost countries such as India, Indonesia, Philippines and Vietnam. China’s prominent role in the availability of plastics and pricing on a global basis is anticipated to continue and become even more pronounced. Over the last decade, the Middle East has emerged as a serious player in the global molded plastics market owing to the twin benefits of low raw material and feedstock prices and proximity to the highly lucrative Asian market. The Middle East is expected to account for 50% of the new capacity additions during the next five years and would emerge as the world’s leading supplier of polypropylene.
Market for injection molded HDPE resins, representing the largest product segment, is growing at a robust pace, fueled by increased application in industrial packaging. The steadily expanding industrial packaging segment, comprising shipping pails and export markets, are the primary drivers of HDPE resins. On the other hand, molded LLDPE polymers, representing the fastest growing product category, find wide use in film and sheet markets, injection molding, rotomolding, blow molding, and specialty applications. Linear low-density polyethylene (LLDPE) resins are increasingly being preferred over LDPE on account of their properties such as greater elongation and higher tear, tensile and impact strength, as well as enhanced strength, durability and chemical resistance.
Asia-Pacific, backed by strong growth in developing markets of China, Taiwan, and Hong Kong, captures largest share of the world market and is forecast to expand at the highest compounded annual growth rate (CAGR) of 4.6% through 2017, as stated by the new market research report on Molded Plastics. In the last few years, China has emerged as the world’s largest producer of polyethylene (PE) films, dethroning US, the traditional market leader. Continued shifting of global production bases to low cost Asian countries, increase in foreign investments, and rise in the number of new manufacturing establishments, is expected to propel Asia-Pacific into a prime driver of growth. China and India would emerge over the global horizon to drive growth in the medium to long-term period.
Major players in the market include Ameri-Kart, BASF SE, British Polythene Industries Plc, Chevron Phillips Chemical Company LLC, E. I. du Pont de Nemours and Company, Eastman Chemical Company, Exxon Mobil Corporation, Formosa Plastics Corporation, Huntsman International, LLC, INEOS, Kaneka Corporation, LyondellBasell Industries N.V., Pactiv Corporation, Reliance Industries Limited, Saudi Basic Industries Corporation (SABIC), Shin-Etsu Chemical Co., Ltd., Solvay S.A., StyroChem, The Dow Chemical Company, Total Petrochemicals USA Inc., Tosoh Corporation, and Total S.A., among others.
The research report titled "Molded Plastics: A Global Strategic Business Report" announced by Global Industry Analysts, Inc. provides a comprehensive review of market trends, issues, drivers, company profiles, mergers, acquisitions and other strategic industry activities. The report provides market estimates and projections in tons for major geographic markets including the US, Canada, Japan, France, Germany, Italy, United Kingdom, Spain, Russia, Asia-Pacific, Middle East and Latin America. Product markets analyzed include Molded HDPE, Molded LDPE, Molded LLDPE, Molded Polypropylene, Molded Polystyrene, and Molded PVC.
For more details about this comprehensive market research report, please visit –
About Global Industry Analysts, Inc.
Global Industry Analysts, Inc., (GIA) is a leading publisher of off-the-shelf market research. Founded in 1987, the company currently employs over 800 people worldwide. Annually, GIA publishes more than 1300 full-scale research reports and analyzes 40,000+ market and technology trends while monitoring more than 126,000 Companies worldwide. Serving over 9500 clients in 27 countries, GIA is recognized today, as one of the world's largest and reputed market research firms.
Global Industry Analysts, Inc.
Web Site: http://www.StrategyR.com/