The clothes washer screen is perhaps the most consistently clogged of all the screens in appliances and spigots.
Pittsburgh, PA (PRWEB) December 12, 2012
“Shower heads, (including ultra-low-flow styles), the clothes washer hose screen and the dishwasher water inlet screen top the list of plumbing culprits,” says Mr Rooter, “when a homeowner notices a loss of water pressure and volume in these three areas.”
One of the prime targets for lime buildup-calcium and magnesium sediments (the white stuff) that distill out of the water when it’s heated in the water heater is the shower head. “Some shower heads are throwaways,” says Bob Beall, master plumber and genius behind the Mr Rooter Tip Of The Day: free daily expert plumbing advice offered from the most referred Pittsburgh plumbing service, Mr Rooter.
“If you have one of this shower heads that the bottom and top are fused and will not come apart, replace it,” says Beall. Cleaning a shower head is a two-part-procedure: dumping out the water-borne debris and then soaking away the iron stains and lime. “In most cases, says Beall, “you will have to remove the shower head to clean it by unscrewing it from the chrome angled pipe coming through the wall.
“The clothes washer screen is perhaps the most consistently clogged of all the screens in appliances and spigots,” says Beall who has 25 years of knowledge that he shares with readers from around the world. “And if your dishwasher takes forever to fill, a clogged inlet screen restricting the water flow may be the reason.”
Mr Rooter Tip Of The Day
Tip #1 After removing the shower head, look down into the threaded collar for a screen that can be cleaned. Clean out any sediment with a pick or needle.
Tip #2 If that’s not the problem, disassemble the shower head if you can. Unscrew the base nut with an adjustable wrench or pliers.
Tip #3 Lay the parts on a flat surface so none can get lost. Clean any parts with debris stuck to them. The only way to remove lime buildup from the tiny holes in the shower is to dissolve it. Vinegar works fine. Heat the vinegar (do not boil) and pour into a bowl. Put the shower end head down into the vinegar and leave for no more than 1 hour.
Tip #4 Soaking the head overnight will ruin the finish and metal. Do not add baking soda. Though the fizzing is impressive, the baking soda neutralizes the acidity that dissolves the lime.
Tip #1 The screens are either in the washer itself (in the solenoid, accessed only from the back), where the hoses attach, or in the hoses themselves.
Tip #2 Use a small screwdriver or pick to pull out the screen.
Tip #3 Clean it as necessary or replace it. Never throw the screens away. Their purpose is to keep waterborne debris from jamming the solenoids. Debris can jam the solenoid closed or open-either way, it interferes with the operation of the machine.
TRADE SECRET: There is no requirement to leave the screens where you find them. They can be moved any location, just so it is before the water enters the washing machine.
Dishwasher Inlet Screen
Tip #1 Open the lower access door at the bottom of the dishwasher and locate the inlet valve solenoid, typically on the bottom left. In some cases you may have to pull the washer out and put it on its back to have access to the solenoid.
Tip #2 Locate the solenoid valve, remove the inlet hose, and then unscrew the brass angle fitting. Pop the screen out with a pick or small screwdriver, and clean or replace it.
Tip #3 Reassemble the parts in the reverse order.
Beall ‘s goal is to provide affordable costs to homeowners for any of the services they may need, many of which might occur unexpectedly. Mr Rooter coupons help to achieve this goal, as well as expert plumbing advice offered daily to homeowners. Mr Rooter prides itself on excellent customer service. Fast, courteous and front line services is what you should expect. We guarantee that is what you will get and our customers always know the price before we start. Learn about Mr Rooter Trenchless Pipelining System Repair.
About Mr. Rooter ® :
Established in 1970, Mr. Rooter® is an all-franchised, full-service plumbing and drain cleaning company serving 2.9 million consumers in the Northeast Ohio and Southwest Pennsylvania region. Recognized by Entrepreneur magazine among its “Franchise 500” and Franchise Times Top 200, Mr. Rooter® provides services to both residential and commercial customers. 24/7 emergency plumbing repairs call 1-877-ROOTER2. For more information or to schedule an appointment, please visit our Web site at http://www.rooter2.com . Follow Mr. Rooter on Twitter (https://twitter.com/mrrootermedia ), or like Mr. Rooter on Facebook (http://www.facebook.com/MrRooterPittsburgh).
Mr Rooter currently serves seven major Southwest PA counties: Allegheny, Armstrong, Beaver, Butler, Fayette, Sharon, Mercer, Washington, and Westmoreland. Mr Rooter Youngstown serves three major Northeast OH counties: Columbiana, Mahoning and Trumbull.
Holiday Super Special – $495 Hot Water Tank Replacement
Steelers vs Bengals ticket giveaway. Sign up for Mr Rooter Tip Of The Day and automatically be eligible to win two (2) free tickets to the December 23rd home game @ Heinz Field.
There’s A Reason They Call Us Mr.™
Debra Santavicca PR, SMM, WebIT
Mr. Rooter Media Center