GL Releases Portable T3 E3 T1 E1 Analyzer Unit

Share Article

GL Communications Inc. announced today the release of a Portable All-in-One T3 E3 T1 E1 Ethernet Analyzer Unit.

Many more such functions are being added to the analyzer that would enrich the capability and utility of the product

GL Communications Inc. announced today the release of a Portable All-in-One T3 E3 T1 E1 Ethernet Analyzer Unit. In a statement to the press, Mr. Jagdish Vadalia, Senior Manager of Product Development, said, “The size of a small paperback book and weighing only 1.75 lbs, GL's newest T3 E3 T1 E1 Ethernet Analyzer is one of the smallest and lightest analyzer units in the world. The pod when connected to a Notebook PC is capable of capturing two full T3 / E3 data streams, dropping and inserting T1 or E1, full Ethernet analysis, and HDLC, ATM, FR, and PPP Analysis.”

Mr. Vadalia further added, “GL's T3 E3 T1 E1 Ethernet Analyzer can also be used in conjunction with GL's Laptop T1 / E1 analyzer for individual T1, E1, DS0, and Analog analysis. This analyzer is highly portable and flexible to operate - it can work with a desktop or a laptop PC”. He added, “Many more such functions are being added to the analyzer that would enrich the capability and utility of the product”.

Interfaces Supported

GL's T3 E3 T1 E1 Ethernet Analyzer comes with a variety of interfaces as shown below:

•T3 or E3 - BNC interface (2 Transmit and 2 Receive ports)
•T1 or E1 - RJ-45 interface (2 Transmit/Receive Ports)
•External Clock: MBX (2 - one each per T3/E3 ports)
•Ethernet Port - For wirespeed Ethernet analysis, remote monitoring, and management
•USB - 2.0 - The USB interface is used to connect the analyzer unit to a Desktop or a Notebook PC for storage, display, and control

Important features:

•Dual T3/E3 Receivers and Transmitters for simultaneous Non-intrusive and Intrusive testing of both eastbound and westbound signals
•Plug and Play to PC Interface through USB 2.0
•Software selectable T3 and E3 interface along with T1 and E1 Drop and Insert
•Simultaneously record (capture) / playback (transmit) two entire T3 E3 signals in framed or unframed modes up to hard disk capacity
•Dual BERT, G.821 Analysis, Error Injection and Alarm Generation
•Monitor T3 E3 signal status, frequency, level, and various frame errors
•Drop / insert T1 E1 signals from both ports
•Flexible clocking - internal, recovered (from T3/E3, T1 or E1) and external
•Transmit externally inserted or internally generated T1 E1 streams into T3 E3
•Protocol testing for ATM, PPP, HDLC, and Frame Relay
•Scripting and Automation through GL's well-known Windows Client Server (WCS) software
•Remote Control through TCP/IP interface
•Monitor / Manage the Analyzer remotely via Ethernet port

Receiver Capabilities:

Line testing and diagnostics: The T3/E3 Receiver can non-intrusively monitor a T3/E3 bit stream, and present a comprehensive diagnostics of PCM impairments and alarm messages in real-time.

De-multiplex T1 or E1 signals: User selected T1 (or E1) channels can be dropped using the T1/E1 input/output interface. Up to two T1 or E1 channels can be dropped from any one of the received T3 or E3 signals.
Capture Entire T3 or E3 Stream: The T3 E3 analyzer can capture (record) two complete T3/E3 streams to the hard drive as a binary file.

Transmitter Capabilities:

Line testing and diagnostics: T3/E3 transmitter can inject errors and alarms as well as do Bit Error Rate (BERT) testing.

Multiplex T1 or E1 signals: Up to two user selected T1 (or E1) channels can be externally inserted using the T1/E1 input/output interface into any one of the transmitted T3 or E3 signal. The inserted T1 or E1 signal can be selectively transmitted through one or more of the T1/E1 transmit channels, or broadcasted through all the
T1/E1 channels. Additionally, the received T1/E1 signal can be looped back and transmitted or the transmitted
T1/E1 signals can be set to carry AIS..

Playback (Transmit) entire T3 or E3 Stream from the PC hard drive: The T3 E3 Analyzer can also transmit (playback) an already captured binary file through the T3/E3 stream.

For a comprehensive understanding of the above product, please visit T3 E3 T1 E1 Ethernet Analyzer web page.

About GL Communications Inc.

Founded in 1986, GL Communications Inc. is a leading supplier of test, monitoring, and analysis equipment for TDM, Wireless, and VoIP networks. Unlike conventional test equipment, GL's test platforms provide visualization, capture, storage, and convenient features like portability, remotability, and scripting.

GL’s TDM Analysis & Emulation line of products includes T1, E1, T3, OC-3, STM-1, analog four-wire, and analog two-wire interface cards and solutions. Capabilities include voiceband traffic analysis and emulation across all traffic types (voice, digits, tones, fax, modem), all protocols (HDLC, ISDN, SS7, CAS, GSM, GPRS, CDMA), and with capacities up to thousands of channels.

GL’s VoIP products generate / analyze thousands of calls simultaneously with traffic types such as voice files, digits, tones, noise, and fax using G.711, G.729, AMR, EVRC, and GSM codecs. Additional features include visual analysis, real-time listening, recording, and voice quality assessment using ITU algorithms PAMS, PSQM, and PESQ.

GL’s Wireless Products perform protocol analysis and voice quality assessment on GSM, CDMA, UMTS, and CDMA 2000 networks. Connections can be made to any wireless phone with automated call control, GPS, mapping software, and real-time signal measurements.

GL’s Echo Canceller testing solutions provide the broadest range of simulation and analysis, including compliance testing per G.168 and G.160. Network Surveillance and Monitoring products include Probes for TDM, VoIP, ATM, and Wireless networks.

GL’s Handheld data testers provide convenience, economy, and portability for almost any interface, including RS232, RS422 / RS530, X.21, T1, E1, T3, E3, and many others.

GL’s Network Surveillance and Monitoring products include Probes for TDM, VoIP, ATM, and Wireless networks. An open standards based approach provides a scalable, feature rich, real-time access to network intelligence. Centralized or distributed access, efficient transport and database loading allow compatibility with 3rd party and standards based monitoring systems.

For more information about GL’s complete line of products,

Shelley Sharma
Phone: 301-670-4784 ext. 114

###

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Mr.Shelley Sharma

Gururaj S D
Visit website