Wind Energy Update: Wind Farm O&M: Best Practice on Cost Containment

When it comes to turning a profit throughout the lifecycle of a wind farm, just a one percent improvement in operations and maintenance can make a huge difference to the bottom line. The challenge, however, is how to achieve that one percent improvement in the face of operations and maintenance (O&M) costs that are double or even triple initial projections.

  • Share on TwitterShare on FacebookShare on Google+Share on LinkedInEmail a friend

LONDON (PRWEB) November 15, 2012

O&M costs under-estimated

On the basis of an exhaustive industry survey, Wind Energy Update finds that wind farm return on investment is around -21 percent. This underperformance is attributable to over-estimation of power production and underestimation of O&M costs.

In the early days, the industry had costed out O&M at roughly 0.5c/kw over a turbine’s 20-year life. But as newer models and their respective components continued to flood the market, this has turned out to be far from the reality.

Wind O&M costs can now be expected to increase on average 253 percent over the 20-year life of the various wind machines.

“Given that every wind turbine comprises an average of 8000 components, it is not surprising that higher-than-expected rates of component failure continue to plague the industry,” say Wind Energy Update.

Understanding the root cause

The constantly evolving wind turbine market means that new components must continually be demonstrated, with little assurance of their availability five years down the track in the event of component failure.

Of even greater concern is that, if not properly addressed early on, component failures can persist through new product generations. It is therefore vital, despite pressure from competitors to continuously push the boundaries on nameplate capacities, that both the onshore industries adopt a backwards compatibility approach when evolving each model.

A thorough understanding of failure trends can also provide a basis for the best O&M practices for a given system.

Sketching a component failure timeline, Wind Energy Update characterize earliest wind turbine designs (1987-91) by their gearbox failures, while wind turbines built between 1994-99 are characterized by electronic power failures.

Turbines manufactured between 2000-2004, again exhibit problems with generators and gearboxes. More recent models are plagued with issues linked to retrofits.

Aftermarket potential

But there is a silver lining. Some component suppliers to the OEM wind turbine market view the aftermarket as a new, long-term opportunity.

“Advances in turbine design may make certain parts obsolete, but with a typical projected turbine life of 20 years or more, the aftermarket will provide on-going spares demand for these suppliers for some time to come”, says Wind Energy Update.

In the long-run, as the wind industry matures and begins to validate the success of condition and performance monitoring systems, as direct drive turbines replace gear-box driven turbines, and as the industry begins to collaborate on O&M, reductions in long-term O&M costs are the most likely scenario.

To learn more about implementing proven O&M strategies to maximize generation and reduce costs in new build, end of warranty and out of warranty wind farms visit the website for the 5th Annual Wind O&M Forum for Power Producers taking place in Hamburg on February 19-20, 2013.

Speakers at the event include E.ON Climate and Renewables (Germany), RWE Innogy (Germany), ENEL Green Power (Italy), JUWI (Germany), SSE (UK), Axpo (Switzerland), NoordzeeWind (Netherlands), ERG Renew (Italy), Agder Energi (Norway), Belwind (Belgium), London Array (UK), GE Wind Services, Romax Technology, A2SEA and many others soon to be announced.

For more information visit: http://www.windenergyupdate.com/operations-maintenance

Or contact
Jon Harman
Wind Energy Update
t.             +44 (0)207 375 7577     (Direct) | e.(dot)jon(at)windenergyupdate(dot)com
t.             1800 814 3459     (US) | t.             1866 996 1235     (Canada)


Contact