Hackensack, New Jersey (PRWEB) January 23, 2013
With the ability to withstand acids, bases and many solvents, Master Bond EP62-1 is primarily used as an adhesive, sealant or coating where the epoxy will be exposed to very harsh conditions. This new two part epoxy features thermal stability with a glass transition temperature exceeding 170°C.
EP62-1 has a long working life of over 12 hours at ambient temperatures and a very forgiving 100 to 10 mix ratio by weight. This system features convenient color coding to facilitate uniform mixing. The color of Part A is clear and Part B is dark brown. It cures rapidly at moderately elevated temperatures, with schedules ranging from 4-6 hours at 60-70°C to 10 minutes at 125°C.
This lower viscosity system is a capable electrical insulator with a volume resistivity exceeding 10 to the power of 14 ohm-cm and a dielectric constant of 3.25 at 60 Hz. EP62-1 delivers tensile shear strengths greater than 2,300 psi and tensile strengths over 8,500 psi. It is a dimensionally stable epoxy that contains no solvents or diluents.
Serviceable over the wide temperature range of -60°F to +450°F, EP62-1 has a shelf life of one year in unopened, original containers. It is available in an assortment of packaging options, including ½ pints, pints, quarts, gallons and 5 gallon kits. Specialty packaging also is available in gun kits, and premixed & frozen syringes.
Master Bond Chemical Resistant Adhesives
Master Bond EP62-1 withstands high temperatures up to 450°F and resists a variety of chemicals. Read more about the full line of Master Bond chemical resistant epoxies at http://www.masterbond.com/properties/chemical-resistance or contact Tech Support. Phone: +1-201-343-8983, Fax: +1-201-343-2132, Email: technical (at) masterbond (dot) com.
About Master Bond
Master Bond has been at the forefront in formulating adhesives, sealants, coatings, and potting/encapsulation compounds to meet specific application requirements in a variety of industries. All Master Bond polymer systems are designed for easy processing and dependability. These include one and two part epoxies, silicones, UV curable and LED curable compounds. For over three decades Master Bond’s research team has worked on developing new formulations for advanced industrial manufacturing.