Dual Channel PC/104 CAN Module Provides 1000V Isolation for Automotive and Industrial Applications from WinSystems, Inc.

The PCM-CAN-2-ISO is designed for operation in high-voltage renewable energy, high-speed industrial control, or unpredictable automotive applications. This Small Form Factor module supports transfer rates to 1 Megabits per second and has jumper selectable termination resistors so it can be used in various topology systems.

  • Share on TwitterShare on FacebookShare on Google+Share on LinkedInEmail a friend
WinSystems' PC/104-compliant, dual channel, isolated Controller Area Network (CAN) module

Dual Channel PC/104 CAN Module Provides 1000V Isolation from WinSystems

The PCM-CAN-2-ISO will operate over the industrial temperature range of -40° to +85° Celsius.

Arlington, Texas (PRWEB) February 12, 2013

WinSystems introduces their PCM-CAN-2-ISO, a PC/104-compliant, dual channel, isolated Controller Area Network (CAN) module with Windows and Linux drivers available. The board employs high-speed isolated data couplers and power supplies to provide 1000V protection between the two NXP SJA1000 CAN controllers and the network interface. This makes the module ideal for operation in high-voltage renewable energy, high-speed industrial control, or unpredictable automotive applications, while it maintains low EMI and low-latency operation. Each CAN channel can provide isolated +5VDC power or receive isolated +5 to +12VDC power from the interface for additional flexibility. The +5VDC power supply includes overvoltage, overcurrent, and short-circuit protection.

The PCM-CAN-2-ISO is compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID). CAN is an industry-standard, serial, asynchronous, multi-master communication protocol for connecting electronic control modules, sensors, and actuators in automotive and industrial applications. The PCM-CAN-2-ISO supports transfer rates to 1 Megabits per second and has jumper selectable termination resistors so it can be used in various topology systems.

WinSystems offers this board in other off-the-shelf configurations. The PCM-CAN-2 is a dual channel, non-isolated unit. The PCM-CAN-1 is a single channel, non-isolated unit. The PCM-CAN-1-ISO is a single channel, isolated unit. Special OEM configurations are possible. All configurations will operate over the industrial temperature range of -40° to +85° Celsius.

AVAILABILITY AND PRICING
Delivery is from stock. Please contact WinSystems’ Applications Engineering Group for pricing; telephone: (817) 274-7553, Fax: (817) 548-1358, and e-mail: Info@WinSystems.com.

PRODUCT PAGES
PCM-CAN-2-ISO and PCM-CAN-1-ISO:
Product Page    http://pc104.winsystems.com/products/PCM-CAN-2-ISO.cfm
Data sheet    http://www.winsystems.com/datasheets/PCM-CAN-2-ISO-DS.pdf
PCM-CAN-2 and PCM-CAN-1:
Product Page    http://pc104.winsystems.com/products/PCM-CAN-2.cfm    
Data sheet    http://www.winsystems.com/datasheets/PCM-CAN-2-DS.pdf

ABOUT WINSYSTEMS
WinSystems designs and manufactures industry-standard PC/104, PC/104-Plus, EPIC, EBX, SUMIT-ISM, and STD Bus single board computers (SBCs), I/O modules, Panel PCs, and enclosures for use by OEMs and system integrators worldwide. We have served the industrial, transportation, pipeline, Mil/COTS, communications, remote, and medical markets for over 30 years. We are an employee-owned company.

WinSystems, Inc.
715 Stadium Drive | Arlington, Texas 76011 USA
Website    http://www.WinSystems.com
E-mail    Info(at)WinSystems(dot)com
Telephone (817) 274-7553


Contact

Attachments