Aiken, SC (PRWEB) January 18, 2013
Cavaliere wall mount range hoods are crafted from 19 gauge stainless steel in satin finish. The three range hood models can only vent air through ducts that lead outside. It needs to be noted that they are not capable of recycling the air within the room. The range hoods are equipped with two 35W dimmable halogen lights; they are electronically controlled with 4 touch sensitive buttons: power on/off, lights on/off, increase, and decrease the motor speed.
The motor used in Cavaliere range hoods is ultra-quiet and capable of moving up to 860 cubic feet of air per minute. The noise levels produced by the blower range from 35 dB to 68 dB; this can be compared to a noise ranging from a quiet conversation (35 - 40 dB) to a normal conversation (65 dB). The range hoods are equipped with a 6” round duct vent.
The model AP238-PSD-30 has a 30” wide by 19 3/4” deep canopy made out of 5/16” thick tampered glass. The telescopic chimney extends from 23” to 40” (measured from the top of the canopy). The range hood is designed for 8 to 9 foot ceilings; however the measurement that needs to be taken into consideration is the distance between the cooktop and the bottom of the canopy which is recommended to be between 28” and 31” for efficient air evacuation from the cooking area.
The model AP238-PSD-36 has a 36” wide by 19 3/4” deep canopy made out of 5/16” thick tampered glass. All other characteristics are the same as of the aforementioned model AP238-PSD-30
The last Cavaliere range hood model added recently to Warehouse USA’s inventory is AP238-PSD-42, which has a 42” wide by 19 3/4” deep canopy glass canopy. The hood’s characteristics and installation recommendations are the same as for two previous models.
All Cavaliere kitchen range hoods are available at Warehouse USA – http://warehouse-usa.com; they are on sale with free shipping throughout 48 contiguous states. For more technical information or if in doubt please don’t hesitate to call 888-693-8066.