Wheelabrator® Work Car Shot Blast: Efficiently Cleaning Custom Fabrications

Share Article

Achieving a commercial (SP6) to near white (SP10) blast finish for custom fabrications is no longer a challenge when utilizing the Work Car AUTOBLAST® System, exclusively offered by Wheelabrator Group.

Wheelabrator® Work Car Shot Blast provides surface cleaning solutions to the Fabrication industry.

Achieving a commercial (SP6) to near white (SP10) blast finish for custom fabrications is no longer a challenge when utilizing the Work Car AUTOBLAST® System, exclusively offered by Wheelabrator Group. The parts or components are conveyed through the blast chamber on specially-designed work cars at varying line speeds. This Wheelabrator® production system efficiently removes rust and scale from custom fabrications with a total of eight heavy-duty EZEFIT®12 bladed wheels (number of wheels and type may vary depending on the size and shape of the work). An extensive range of blast cabinets are available to accommodate all part sizes up to 8 feet in width and 16 feet in height. By increasing the production of overall clean work units, the system eliminates environmental problems and high labor costs associated with manual air blasting.

Work Car Shot Blast operational systems are designed for descaling custom fabrications, from fabricated I-beams to bridge girders and construction vehicle components, keeping productivity and economic factors in mind. Not only does the system make cleaning custom fabrications much easier, regular maintenance is also reduced. Minimizing the wear from steel shot abrasives, the blast cabinet is constructed from welded manganese plate with replaceable high chrome cast liners in-line with the blast stream (a full cast liner package is available for steel grit use). Allowing for convenient access, the vestibule work seals are replaceable from the machine's exterior and the upper reclaim area is, equipped with a service platform and ladder.

Wheelabrator Group is a global provider of surface preparation and finishing solutions. Committed to offering the broadest array of technologies, products, services and technical know-how, Wheelabrator Group works closely with customers to deliver the best solutions for their specific requirements. The company's strategically located and electronically linked offices allow Wheelabrator Group to provide unrivalled customer service and support worldwide. For more information on Wheelabrator, visit the web site at http://www.wheelabratorgroup.com.

Wheelabrator products are protected by patents issued and pending in the United States and other countries.
Wheelabrator reserves the right to change the specifications referred to in this literature at any time, without prior notice.
Wheelabrator is a registered trademark of Wheelabrator Technologies Inc.
AUTOBLAST and EZEFIT are registered trademarks of Wheelabrator Group, Inc.        

FOR FURTHER INFORMATION:
Pamela Akin
Marketing Manager
Wheelabrator
800-544-4144, ext. 2295

MEDIA CONTACT:
Flammer Relations, Inc.
Laura Everett
770-383-3360

# # #

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Pamela Akin
Wheelabrator
800-544-4144 ext. 2295
Email >

Laura Everett
Visit website