The newly introduced sinks by Ruvati are crafted from 16 gauge, premium 304 grade stainless steel
Aiken, SC (PRWEB) March 13, 2013
The newly introduced sinks by Ruvati are crafted from 16 gauge, premium 304 grade stainless steel. The 304 stainless steel is 18% chromium and 10% nickel, which makes it ideal for high quality sinks and cookware. Chromium is a hard metal that increases the steel’s hardness and the addition of nickel helps resist corrosion, thus products made out of 304 stainless steel are characterized by brilliant luster, rust resistance, sturdy construction, and easy maintenance. The 16 gauge thickness of the steel means that it is 1.5 mm thick, which is the thickest sheet metal used to fabricate residential sinks. This thicker sheet metal allows for a higher resistance against dents and a better muting of the sink. In order to further reduce the reverberations caused by running water, Ruvati employs heavy duty sound guard padding and undercoating in all of their sinks.
The model RVH7100 is an undermount type of sink, the exterior rim dimensions are 23” by 20”, and the bowl is 21” by 18” and 10” deep. The bowl has zero radius corners, which accentuate the contemporary look and the newest trend in kitchen design. The rear drain placement and drain grooves add to the sink’s functionality. RVH7100 sink ships with a cut-out template, mounting brackets, bottom grid, and basket strainer.
The model RVH7200 is a double bowl undermount sink, its exterior rim dimensions are 29” by 19”. The left bowl’s interior dimensions are 15 1/2” by 17”; the right bowl is 10 1/2” by 17”. Both bowls are 10” deep and they have zero radius corners, their drains are placed in the rear and the grooves at the bottom help with the water drainage. RVH7200 sink ships with a cut-out template, mounting brackets, bottom grids for both bowls, and 2 basket strainers.
The model RVH7300 is a single bowl sink from the Gravena series, which is characterized by small, near zero radius corners of the bowl. The exterior dimensions of the rim are 30” by 18”, the inside bowl dimensions are 28” by 16” by 10” deep. RVH7300 sink ships with a cut-out template, mounting brackets, bottom grid, and a basket strainer.
The model RVH8400 is a double bowl, undermount, corner sink from the Gravena series with near zero radius corners of the bowls. The bowls are set at a 90⁰ angle in relation to each other, they are identical in size. The inside dimension of each bowl are 15 1/2” by 14” by 10” deep. The width of the rim around the bowls is 1” wide. The plate between the bowls has four pre-drilled holes, which can accommodate a two handle faucet with either a vegetable sprayer or a soap dispenser. The flat bottoms of the bowls have four grooves which help drain water efficiently from the sink area. RVH8400 sink ships with a cut-out template, mounting brackets, 2 bottom grids, and 2 basket strainers.
All Ruvati kitchen sinks are now available at Warehouse USA – http://warehouse-usa.com; they are on sale with free shipping throughout 48 contiguous states. For more technical information or if in doubt please don’t hesitate to call 888-693-8066.