Trick Flow Chromoly Pushrods: The Right Pushrod for High Performance Use

Share Article

Trick Flow’s new chromoly pushrods deliver the strength to handle the stress of high lift cams and big valve springs, plus the right length to optimize valvetrain geometry.

Trick Flow’s new chromoly pushrods deliver the strength to handle the stress of high lift cams and big valve springs, plus the right length to optimize valvetrain geometry.

The one-piece pushrods are cold-formed from .080 inch wall, 4130 chromoly steel. Trick Flow closes the oil holes to within .040 inch, then drills and chamfers them to .093 inch. That eliminates stress fractures and cracks that can be caused by the cold-forming process.

Trick Flow pushrods are available in 5/16 and 3/8 inch diameters with over 80 different lengths to choose from. The pushrods are induction-hardened for use with guideplates.

Product Link
http://www.trickflow.com/egnsearch.asp?Ntt=Pushrods&N=400098++115+301937&autoview=sku&Ntk=KeywordSearch

Trick Flow Specialties
http://www.TrickFlow.com
1-330-630-1555

Share article on social media or email:

View article via:

Pdf Print

Contact Author

Mike Downs
Trick Flow Specialties
330-630-1555 4817
Email >