North Port, Florida (PRWEB) September 04, 2013 -- Pexheat is proud to announce the release of the R-flex Insulated Tubing System by Watts Radiant. The art of simplicity.
If you have ever tried to bury a run of supply tubing underground, you have come up with the dilemma of how to keep from losing all the heat carried by that pipe. Many of us just used a piece of drainage pipe as a piece of conduit to keep the dirt and moisture off the pipe and hoped for the best. Unfortunately if that pipe was bringing heat in from a Wood Boiler or running between two buildings, that supply piping lost a lot of heat into the ground. It was also quite tough to snake a piece of 2 in. PEX through a corrugated drainage pipe.
The R-Flex system can be used for hydronic heating, hydronic snow melting, district heating, commercial and process piping, geothermal, agricultural piping, biomass heat sources, wood-fired boilers, solar, cooling towers, chilled water systems and much, much more!
Watts Radiant has made the job of buried supply piping fast and easy. With the release of the R-flex Insulated Tubing System, the installer has maximum flexibility in his pipe, superior insulation ability with several layers of cross-linked polyethylene foam, exceptionally high durability with a double walled outer casing, lighter weight than rigid piping systems and easy installation with the R-flex compression fittings, caps and sleeves.
The R-flex system is very easy to install with shrink caps for terminal installations, waterproof elbows, tees and inspection chambers for secure reliable underground connections. It also includes a full line of compression fittings for reliable connections without an expensive crimping tool.
R-flex pre-insulated piping comes in single and double (supply and return) tubing runs. It also comes in 1 in., 1.5 in., 2 in., 2.5 in., 3 in., 3.5 in. and 4 in. sizes. You can purchase in pre-cut lengths or bulk coils. Contact them to find out how to use R-flex Insulated Pipe on your next job.
About Pexheat: Providing radiant floor heating solutions and plumbing supplies to professional contractors, homeowners and the do-it-yourselfer, Pexheat is a full service floor heating design and sales company based in North Port, Florida. With their expert design staff and flexible designs, they are radiant done right.
Brian Whitehurst, Pexheat, http://www.pexheat.com, 631-240-9173, [email protected]
Share this article