Uniweld Products, Inc. Officially Releases the New EZ Turn™ Anti-Blowback Hose

Uniweld is proud to announce the release of their new, revolutionary EZ Turn™ Anti-Blowback Hose for the HVACR Industry.

  • Share on TwitterShare on FacebookShare on Google+Share on LinkedInEmail a friend

EZ Trun™ Anti-Blowback Hose

This live demo challenges any style hose being used in the industry today against the EZ Turn™ Anti-Blowback Hose and proves its superiority.

Fort Lauderdale, Florida (PRWEB) February 11, 2014

Uniweld Products, Inc. is proud to release the brand new EZ Turn™ Anti-Blowback Hose! This innovative product was first seen at the AHR Expo in New York City where it debuted with the “EZ Turn Challenge!” This live demo challenges the EZ Turn™ Anti-Blowback Hose against any style hose being used in the industry today and proves its superiority.

When connecting a standard hose nut to an access fitting, the valve core is depressed and the pressure from the system is released, spraying harmful refrigerant directly onto the technician’s hand and many times causing finger burns. This extreme pressure pushes back on the nut and causes a large amount of friction between the threads, making the nut very difficult to fully seat against the access fitting and provide unrestricted flow. Many times pliers are required to turn the nut and complete the seal. The EZ Turn™ Anti-Blowback fitting has a thrust bearing that reduces friction so the service hose can be easily connected to the access fitting while under pressure. This becomes extremely useful when working with a high pressure 410A system.

The compact design of the EZ Turn™ Anti-Blowback Hose allows it to fit in tight work spaces and the deep square knurling gives the user complete finger-tip control. It has an orange and blue colored band around the hose nut to set it apart from the rest and make it easily recognizable. The hoses can be purchased individually, as a set of three, as a set of three bundled with manifold, or, if you already own hoses, EZ Turn™ Adaptors are available to convert any hose to an EZ Turn™ Hose.

Since its first appearance at the AHR Expo the EZ Turn™ Anti-Blowback Hose has seen a great response from everyone that has taken the “EZ Turn Challenge!” Be on the lookout for these truly revolutionary hoses at your local distributor and if you happen to see an “EZ Turn Challenge!” demo stand in the store, Uniweld encourages you to grab your own hose and put it to the test. The EZ Turn™ Anti-Blowback Hose is sure to impress and will prove to be yet another one of Uniweld’s “Quality Tools That Go To Work With You®”.


Contact

Follow us on: Contact's Google Plus

Attachments