New Rigid, Abrasion Resistant Two Component Epoxy for Bonding, Coating and Sealing Applications, Master Bond EP21SC-1

Two component epoxy resin system for bonding, coating and sealing is formulated for outstanding abrasion resistance; features high Shore D Hardness and has a convenient one to one mix ratio by weight or volume.

  • Share on TwitterShare on FacebookShare on Google+Share on LinkedInEmail a friend

Hackensack, NJ (PRWEB) February 18, 2014

Engineered with a silicon carbide filler material, Master Bond EP21SC-1 delivers abrasion resistance for an array of chemical and mechanical processing applications. This epoxy has a smooth paste consistency and a non-critical one to one mix ratio by weight or volume. As a two part system, it cures readily at room temperature or more quickly at elevated temperatures.

With a Shore D hardness exceeding 95, EP21SC-1 is a rigid compound that adheres well to treated metals, ceramics and many plastics. Its physical strength profile includes a tensile strength greater than 6,000 psi and a compressive strength of over 15,000 psi at room temperature. Since the system is 100% reactive and does not contain any solvents or diluents, it has minimal shrinkage upon cure. Additionally, EP21SC-1 is capable of withstanding range of chemicals such as water, oils, hydraulic fluids, acids and base. The combination of the aforementioned properties enables this system to be widely employed in maintenance, liner, tank and chute applications.

EP21SC-1 is serviceable from -60°F to +250°F. It is a competent electrical insulator and it has a low thermal expansion coefficient. Both Parts A and B are dark gray in color and are available in standard packaging ranging from pint to 5 gallon container kits.

Master Bond Chemical Resistant Adhesives
Master Bond EP21SC-1 features abrasion resistance and convenient handling for bonding, coating and sealing applications. This two component epoxy also resists a variety of chemicals.
Read more about Master Bond’s chemical resistant at http://www.masterbond.com/properties/chemical-resistance or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: technical(at)masterbond(dot)com.


Contact